I have Airforce Condor with .22 and .25 LW barrel. About 8 years ago, I purchased what seems now to be a unique hammer and spring combination from a fellow named Drum at Leupy's Customs. The hammer consists of two pieces-one being brass and the other an engineering grade plastic. The two pieces are pressed together. Instead of the hammer being "frame guided", it is "barrel guided." The plastic portion rides on the barrel without touching the frame while the brass portion does not touch the frame or the barrel. The spring is stainless steel with a "spring centraizer." The plastic portion is chamfered where it comes into contact with the breech. The hammer weighs 100gram. According to Drum, the "barrel guided" hammer should be more consistent than the other although I have not actually tested as I have been out of the scene for some time. The lowest setting with the stainless spring seems to be equivalent to the highest setting with factory spring and "frame guided factory style" 95gram hammer (from Talon Tunes.) I am using the Ring-Loc setup from A/F so should be easy to adjust power level. Drum still has a website but it seems to be having some issues. http://www.leupyscustomshop.co.uk. Has anybody tried something like this or similar? I will try to include pics.
