Condor Advice

Jump to latest Follow Reply
D

dwilson050

Member
Dec 17, 2017
203
26
Beaverton, Oregon, Washington United States 97006
Happy New Year all! 

So I'm finishing up my Condor rebuild and was wondering… for the spring ends, hammer and slide… do you lube those? If yes, what lube to you use? I'm not sure if you use something different for metal on metal or not? I've heard of guys using Super Lube for everything, others use Trident Pure Silicone grease. I also saw a thread where someone insisted you use nothing but Graphite Powder for metal on metal.

Also, I want to change my trigger spring to a lighter one on the Condor. When I open it up, I see three springs? Does anyone know which one of the three springs I change? I've scoured the internet and for the life of me, I can't find an answer anywhere.

Thanks! It's going to be a great year for air gunning!

-Dave
 
I just cleaned mine up real good and put the new power spring and hammer in. I have the 25 condor ss and there was a lot of lead dust in there so i didnt want anything sticky in there too gum up and clog. Works great so far. Thanks to dave cole for all his help! I have been searching for a long time on any trigger info and cant find any. If you find anything please share it with me.
 
Upvote 0
@crittahitta, so I finally came across info on the spring. It was an older article by AOA for a "Super Sear 2" mod but the illustration has what we need. Here is the article. Right under the image you will see something that says "You can download the installation instructions HERE". Click on that and it shows which spring is which.

Good luck! -Dave
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu