China clone go BOOM !!! replacment parts are here ...
- Thread starter cosmic
- Start date
Suggestion , Put a bb size of wax on top of your new brass piston & put the head back on. Rotate the assembly one turn & pull the head.
check the thickness of the smashed wax with some calipers or a mic & that will tell you the clearance of it & head. If it is to tight remove what
ever you need from brass piston to be safe.
Fly
check the thickness of the smashed wax with some calipers or a mic & that will tell you the clearance of it & head. If it is to tight remove what
ever you need from brass piston to be safe.
Fly
Upvote 0
Thanks Fly.. I had to swap out the high pressure piston.. The new one is to large in diameter and it looks like it was for a yong heng type.. So I changed out the piston and added a new seal.. I will test it tomorrow..
Upvote 0