Changing calibers in the Red Wolf!

Yep, definitely a poly barrel!

Interesting that theTPs' are so small, the .22 HP barrel TP is 5mm and 4.5mm in the breech, I would have expected closer to 6mm for a .25.

I wonder if that has been done to suit the lower power restriction for where the gun was shipped to? smaller TP's would give much better ES on a lower power gun though.

What power is your gun producing and what are the program parameters do you know?

I don’t know the program parameters (don’t have a programmer) but here’s a Labradar shot with jSB Kings. It had power enough for them.

I have recently upgraded the Wolf with a Heliboard, so with the larger capacitors and 12(!) fully programmable power levels I can customize the levels to my hearts content. (The Screenshot was with the standard RW electronics still on board)

Now the only thing nice to know is what kind of twistrate (a la ART?) my barrel is, as the idea is to haul some slugs downrange when they get available...

Well the speed is bang on for the .25 940FPS is where I always found the .25 will shoot best.

Your gun will not have the .25 ART barrel, these only went out on the latest guns i.e. SAFARI, they are markedly better than the old spec poly barrel you have, not that the old spec were not really good, just that the ART are sublimely good at longer ranges.

I like sublimely! I wonder if they’ll sell these barrels individually...

I think demand is outstripping supply currently!

I think demand is outstripping supply currently!

Click to expand...

I'm hearing lots of buzzwords about these new art barrels, is the accuracy displayed anywhere or just have to believe kind of thing.

https://www.youtube.com/watch?v=18Cn-aulTu0

Claudio's .25 has the latest barrel spec.

https://www.youtube.com/watch?v=18Cn-aulTu0



Claudio's .25 has the latest barrel spec.

Click to expand...

I'll wait till I see some actual shooting/targets before getting too excited. But cool introduction.

Martin you have a Heliboard for your RedWolf ? So I presume Jack has made some changes and it is now available for the RedWolf? If so this is good news. 

Thanks Michael

Yes.

Hey Tom - great video and great tips along the way. I just changed barrels on my Red Wolf. One point you need to cover is that when you replace the probe, there is a ball bearing (#34 on the exploded Breach Schematic) that will fall out if you're not careful.