Cantilever - Offset Scope Mounts

Jump to latest Follow Reply
kayaker

kayaker

Member
Feb 15, 2018
1,732
357
Ridgefield WA., United States
I need more eye relief on my scope, have a kral puncher breaker mounted with a Athlon talos btr with high rings currently. Need a set of high offset rings or maybe a one piece cantilever highs (would like to go with one piece but don't know about the spacing in between the rings if it works for that scope ) Open to suggestions if you are currently running one these & where you bought them. Thanks in advance Darell
 
hi Darrel the swfa offset mount will do the trick for you. My phone is screwed up or I would have called.It's a high mount with 30 mm rings and 1" inserts. The pins are about 2" apart. There is 2.5" spacing between 3 screw 1" thick rings. (you need 4.5" of scope body to accept this unit.) look at their site. If this works for you I'll drop in mail, no immediate use now. Do you know how to PM yet?
 
  • Like
Reactions: kayaker
Upvote 0
These are very nice one piece rings, come in black, FDE, Olive green, gun metal grey, red, and blue. And in High and Medium, 30mm or 1". I recommend the 50mm offset ones vice the 34mm. There isn't much room for the turrets on the 34mm ones. I have three of them in use...

Leapers Inc. UTG Accu - Sync Offset Picatinny Rings

1545855845_4145944725c23e365a4c3e2.52201798_UTG one piece.jpg


http://a.co/d/a5zNJPE
 
  • Like
Reactions: kayaker
Upvote 0
C/C Thanks for the information about 34mm to 50mm on the turrets that's good to know as a newbie to these mounts. Is it possible to use a sidewheel with these ? Sorry to say that I haven't payed much attention to other peoples mounts & sidewheel set ups .BTW where did you get that punisher face that I seen the other day on that scope mount ? Maybe that was on your buddies mini can't recall at the moment . Thanks for the info. Darell
 
Upvote 0
Darrell, yes, you can definitely use a side wheel with those mounts. 

As far as the Punisher skull I put one on every Airgun I tune and sell, plus all of my own guns. This is my latest after I did Nicks Cricket mini. It’s a Taipan Mutant standard. I put the carbon fiber wrap on yesterday and also the Punisher. I bought the .22 Mutant to tune and sell, but I like it so much I just might keep it. Shoots the 18.1s at 900 FPS and gets over 65 shots per fill. Plus it’s got that Taipan trigger, absolutely perfect.

1545875466_3505969685c24300a197713.53614795_7DFA2F4C-69FF-4AC2-BE66-011B3F47E209.jpeg


Check out the wood on this Mutant. Much nicer that I’ve seen on others. Appears to be Oak. Not sure though but Nick thinks Oak also and he’s a woodworker. 

1545876167_2822076845c2432c75d03c7.25189650_88A12F37-2C37-4095-8A38-2ACFE9BF48FC.jpeg

 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu