Can someone with a brocock bantam hi lite 22 cal advise…

Forums PCP Airguns Can someone with a brocock bantam hi lite 22 cal advise…

  • Views : 395
  • Link

    crittahitta
    Participant
    Member

    I would like to know what fpe the gun shoots at all 3 power levels. I would like to try it for occasional field target but it needs to be less than 20 fpe. I know 177 cal is preferred but FT will be limited and plain old target and hunting will be the major work done with it. Thanks.

    Link

    Rico_navy1
    Participant
    Member

    https://www.airgunsarp.com/2017/08/11/reviewing-the-brocock-bantam/

    This review states they were getting 20 fpe at the low setting.  You can back the hammer spring tension of a little to get it below that 20 fpe your looking for.

    Link

    randy_68
    Participant
    Member

    mine does 845 fps on low with Crosman 14.3 (22.7 fpe) so would need the hs adjusted down some. It shoots them at 925 on med which is what I shoot it at the most.

    My buddy said his was doing 820 or so on low with same pellet

    Link

    crittahitta
    Participant
    Member

    Thanks guys. I appreciate it.

    Link

    AirNGasman
    Participant
    Member

    My .22 Hi-Lite Beech (purchased new from AoA 2-3 weeks ago) has only TWO power levels as spec'ed some places, not others. It gets 22 foot-pounds on low power. Don't know how reducing the power may or may not adversely affect efficient function of the Slingshot hammer/valve system, but assume it might.

    Link

    sqweeler
    Participant
    Member

    Two power level's here also.16gr predator's 905fps on high.

    Link

    douger
    Participant
    Member

    mine had 2 power levels also  18 gr jsb 880  powers 2 was 810 if I remember right 

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.