Buy a hand pump or a small tank?

The pump is not for every one,,,,lI don't mind it at all ,,I have a p'rod and a disco,,when my son is with me I pump a lot! It's less work than pumping up bicycle tires 700 c to 120 psi with a joe blow pump,,,I take my np2 as well ,,,,,.but the complaint about hand pumps,is a little out of per portion. I do want a small tank for hunting trips good luck JeffW
 
"Jeffhalfrack"The pump is not for every one,,,,lI don't mind it at all ,,I have a p'rod and a disco,,when my son is with me I pump a lot! It's less work than pumping up bicycle tires 700 c to 120 psi with a joe blow pump,,,I take my np2 as well ,,,,,.but the complaint about hand pumps,is a little out of per portion. I do want a small tank for hunting trips good luck JeffW
A Discovery only fills to 2000psi and the Prod has a tiny cylinder. The pumping effort is not comparable to a larger 3000psi or 4500psi tank.

Having to pump for 15 minutes every 15-25 shots is no fun at all when plinking. 
 
I ordered one of the new Maximus when they came out and a hill mk4 pump. Before the Maxi came I ordered a mrod .22 and pumped it up one time with the hill pump. And since they said on AGN buy a great white tank, I now have one. The hill pump works fine, but for me it takes the fun out of shooting. And I knew pcp rifles were the ledge I had stepped off so I can use this tank for so many future rifles. Now which rifle is next for me is the only question. ;)
 
I bought the Hill pump and then the CF tank. The pump sat for a long time, well I just had my tank hydroed where a leaking burst disc was found. The shop that fills my air refuses to service the tank. So, I am buying a new AIRHOG CF tank as soon as I can. In the mean time, I'm pumping. Buy a pump and you'll have air. A compressor of my own is in the works.

Jamie 
 
I have no interest in an airgun that can be powered only by someone else. I haven't gone beyond a hand pump though I may. But I consider a handpump essential. 22 rimfire outsources the propulsion to a factory somewhere else. What could go wrong? You can cast bullets, but what happens when the propulsion is unattainable? 

The 5mPa between 20mPa (what I pump to) and 15mPa (off regulator) gets me 114 shots with RWS Hobbies in my Huben for punching paper. Only get ten shots with beasts. I find a lot of reasons to shoot light pellets.

I'm 56, 5'6", 190#, pumping is a cinch.
 
I'm 64, 5'7" and 157lbs. I use a Hill MK4 pump on a Synrod and Taipan Mutant. On the synrod I fill to 2600 psi and shoot 8 shots down to 2200 psi. Not many shots for the effort. I fill the Mutant to 3600 psi and get 50 something shots down to 1750 psi. The mutant takes a little longer but gets way more shots at a lower fpe. It's a little bit of a workout but plenty doable if you're willing to put forth some effort. I don't have the option since I can't find anyplace any where near me to fill a tank.
 
I am cautiously stepping into the whole PCP world. In the past I purchased, spring-air, gas-piston, pump-up, or CO2 air rifles. I took advantage of the AirGunNation 25% discount a couple days ago (Friday) and ordered the Maximus with Pump for $262. Shipping was free from Crosman. Like many of the people here, I do not live in a major city. The nearest place which could fill a tank is a 2 hour round-trip. The Maximus only requires 2000 PSI, which seemed more reasonable to use a pump with. The fact it will give about 20 usable shots (.22 Cal) per filling made it seem like a reasonable option. I will see how I feel about PCP, and whether it is worth all the fuss. If so, I may get a tank, or a shoebox compressor. For now, I am willing to see where this goes.