Bullet mold

Forums Big Bore Airguns Bullet mold

  • Views : 451
  • Link

    Adimax
    Participant
    Member
    Link

    Bullfrog
    Participant
    Member

    The mold is .452. Too small. You want .458 sized to .457. 

    Link

    guod123
    Participant
    Member

    I have a 350 grain mold (.457) from Midway. They were about 20.00 each. Not too good results with the SS, also have a 450 and round ball both .457 Trying NSA slugs hoping for better results. The NOE pellet mold could be interesting, waiting for their arrival and report.

    Link

    Adimax
    Participant
    Member

    Ok.Thank you!

    Link

    MI_Yeti
    Participant
    Member

    I use the lee 340-f mold for my texan. The bullets shoot very well as cast out to 50 yards. I have not shot farther than that becasue shots at deer were I had expected to be hunting would be under 25 yards. As long as you follow the break in directions the mold will work well and it can be had under $30 new. I have attached a photo of a 50 yard target shot with the lee 340-f bullets from my stock standard .45 texan.

     

     

     

     

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.