BSA TACTICAL REVIEW

Trust475, 
I think JoeWayneRay was at first pleased with what he saw, until he had a failure to adjust back to ten meters. What curdled the whole deal was the lack of gracious customer support. I have a BSA scope which is rather good (within it's price range). They make a lot of value priced scopes which are feature rich with "decently coated" glass. This is not to say they are absolutely top notch, but rather, for their price range they are normally darn good. As always, if you jump up to SWFA prices, you get better glass. And on other brands you can get similar features with better glass, albeit at double or triple the cost. They often do specialty runs for retailers, such as MidwayUSA. The product will sell for a while, and then go into a heavy price reduction on closeout. I picked up my BSA scope under closeout for a paltry $89, and am pretty happy with it. I have a basic mantra 
​"never buy more scope than your air rifle is accurate". This is why you will never find a Leupold scope on any of my Benjamin springers, instead you will find a UTG scope. A BSA scope is currently sitting on my Benjamin Maximus, and to be honest, it is a bit "overscoped". But the price was right ($89) in closeout. Link..
https://www.midwayusa.com/product/962234/bsa-tactical-mil-dot-rifle-scope-30mm-tube-6-24x-44mm-side-focus-glass-etched-mil-dot-reticle-matte
​ I think JoeWayneRay has the right of it. A scope *can* be judged by its warranty service.... if you actually intend to make use of the warranty. I would be unlikely to send any scope which cost less than a hundred bucks back for a warranty repair, I would toss it, and walk away.
​ To me, a warranty means a few things beyond simple replacement. It means a manufacturer tried to make the product well enough that they will not face an onslaught of expensive returns. It also frequently means the company is committed to re-tooling production to modify their product line when a congenital fault is discovered in the returned products. I was associated with a company which had an unlimited lifetime warranty on their products. After seeing the same failure many times under warranty repair, to keep from bleeding costs, they redesigned their products, retooled, and eliminated the problem. Everyone wins in this scenario, the manufacturer faces less (costly) warranty actions, and the customer ends up with a product which is progressively more reliable. Perhaps my only criticism of the video is, many manufacturers only warranty to the original purchaser, as a product can be re-sold over decades through private sales. Most people eventually retire b-grade scopes, as they move on to higher grade scopes. I certainly have a graveyard of "placeholder" scopes which once rested on airguns. Many producers of b-grade scopes count on the fact that most of their products will be replaced within a decade (or less). This is part of their warranty "cost" calculations.