BSA R10 in Exceptional walnut stock and 360cc bottle

Jump to latest Follow Reply
N

NRN2015

Member
Jun 11, 2015
94
11
Oregon, United States
Just wanted to show you guys how versatile and wonderful these little rifles are. Super accurate and easy to modify in many variations. Here is an example. This gun has a Huma regulator and and short 12" barrel. Also the 360cc theoben bottle fits like a charm. Almost looks like a really fat down tube rather than a bottle. I have not done shot count yet, but it think it will be better than the 200cc stock version :) wink wink. Although the the 200cc bottle takes 232 bar...I think this 360cc bottle takes 3000psi. Also these guns can be fitted with a carbon fiber 480cc bottle. Enjoy!





Some may not like the bigger bottles, but those of you who do...this is some eye candy:)
 
"pulps"Who would I need to talk to for the shorter barrel and carbon fiber bottle installed if I were to purchase a new R-10 MK2 today?
Click to expand...
The carbon fiber bottle is from RAW. You'll have to inlet the stock some to accommodate the larger shoulder. The short barrel can be done by Nick at http://www.air-superiorityproducts.com/

It would end up looking like this. I get 100 shots.









 
Upvote 0
"SPDRCER"
"pulps"Who would I need to talk to for the shorter barrel and carbon fiber bottle installed if I were to purchase a new R-10 MK2 today?
Click to expand...
The carbon fiber bottle is from RAW. You'll have to inlet the stock some to accommodate the larger shoulder. The short barrel can be done by Nick at http://www.air-superiorityproducts.com/

It would end up looking like this. I get 100 shots.









Click to expand...
What psi do you fill to? To get 100 shots
 
Upvote 0
"camd"So no stock mods needed for the theoben bottle? And the bottle uses the same connection as the bsa?
Click to expand...
The 360 Theoben bottle pictured fits without stock modification, as does the valve. The carbon bottle from RAW will require the stock to be inleted to accommodate the larger shoulder but, the valve still threads right in. 

If if you want a larger bottle, without modifying your stock, RAW has a 280cc that will fit. I don't know where to to get a 360 bottle. 

Craig
 
Upvote 0
"bvan"Does the shorter barrel affect it's accuracy? I'm assuming the report is louder with the shorter barrel also?
Click to expand...
Negative on both. The shorter barrel has zero affect on it's accuracy. It only affects velocity. I lost about 60 fps. The shroud extends past the end of the barrel the same distance whether it's an 18.5 inch barrel or a 12 inch barrel. The last 6 inches of the shroud pictured is baffles.

Craig
 
Upvote 0
"SPDRCER"
"bvan"Does the shorter barrel affect it's accuracy? I'm assuming the report is louder with the shorter barrel also?
Click to expand...
Negative on both. The shorter barrel has zero affect on it's accuracy. It only affects velocity. I lost about 60 fps. The shroud extends past the end of the barrel the same distance whether it's an 18.5 inch barrel or a 12 inch barrel. The last 6 inches of the shroud pictured is baffles.

Craig
Click to expand...
So can you go back and forth between long and short barrels/shrouds or once you have changed done?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu