Broken Hatsan 135

Forums Springers, Pumpers, C02, & Vintage Broken Hatsan 135

  • Views : 380
  • Link

    AWCG
    Participant
    Member

    The bolt that the barrel pivots on sheared and half is still in the gun and I don’t have the tools to remove it. I bought the gun 8-9 months ago, put a half a tin of lead through it, and then life got in the way and it sat in my gun safe until today. On the sixth shot, snap!  

    Should i I send it back to Hatsan USA, or would I be better off sending it to an air gun smith?

    many thanks
    —Allen

    Link

    Seth0764
    Participant
    Member

    Send it to Hatsan they will fix it

    Link

    AWCG
    Participant
    Member

    Better wording for what I wanted to ask; how is their service department to deal with?

    And thank you. 

    Link

    Seth0764
    Participant
    Member

    I don’t like the system they use but it works for the most part. You will need to fill out the service form on there website. They will email back with instructions. I’ve had warranty issues twice and both times they payed shipping both ways. If you need to speak with them they also have a phone number but they don’t answer or return calls. They only correspond throu email it seems
     

    Link

    AWCG
    Participant
    Member

    Thank you, Seth. Much appreciated. 

    Link

    chenyunl
    Participant
    Member

    Hi, I had the same problem with my Hatsan 135 that I bought 2 months ago. I emailed them and they sent me a new bolt this week, and I installed it by myself. The old bolt was broken apart, so it just dropped out from the forearm. However, I still feel that the gun does not shoot as accurate as before with open sights. 

    Link

    AWCG
    Participant
    Member

    On mine half the bolt fell out with the other half still stuck in the threads. 

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.