Brocock Commander Chrony Results

I'd say it's spot on at 50 yrds, most of what I'm shooting is out to 55-80 yards. I've got a 3 target swinging pellet and am consistently plinking the smallest at about 60 yards. Wind is a big factor at those distances.

On the high power setting I get about 40-50 shots before it gets close to 140 bar, the regulator is set to 150 bar. On the low power setting I'm getting about 80 or so shots.

The magazines are absolutely fantastic and a breeze to load. Each chamber "clicks" and holds allowing for easy pellet filling.

I'll try to toss some pictures up. The DonnyFL Koi does well to suppress the rifle and the stock moderator with barrel shroud has it a notch or two louder than the Gamo Urban. With the Koi all you hear is the slingshot hammer and the pellet zipping through the wind.

I've had zero issues out of the rifle and easily 1500+ rounds through it. I fill it from an Ninja 90 cu-in w/EZ valve and fill that from an LC-110 compressor. I get about 5 full fills to the 480cc CF bottle. I usually fill to 220-230 bar, the book says it'll take 250 bar max pressure.

One of the downsides is the folding stock has a little up/down wiggle to it, I made a nylon strap buffer to shore it up. The collapsible stock helps with my kiddos so they can adjust the size.

Here you go, ignore the DonnyFL Koi moderator I've taken apart, I had a double load that caused a baffle strike. My fault there.

Just wanted to give an update here, I have about 3000 rounds through the rifle with no failures or issues. The DonnyFL Koi moderator in .25 is working great. I am very pleased with the velocity and accuracy. The barrel has never been cleaned and the rifle is more accurate than I am.

Yeah about 40-50 sounds right; manual says it'll fill to 250 bar. I'm filling to 220 bar and then once gas law physics kick in it settles back down to around 200 bar (entropy -> equilibrium). I figured it's set to 150 bar to get to ~960 FPS MV? It's set by the factory at that value.