Bipod for Maurader Pistol

Forums Other Parts, Accessories, & Equipment Bipod for Maurader Pistol

  • Views : 2821
  • Link

    Renegade_626
    Participant
    Member

    Anyone know a good bipod for Benjamin Maurader Pistol? i want something Tactical that looks really good and not really on a budget, want something high end, let me know k? guys thanks

    Mark

    Link

    zachary
    Participant
    Member

    i use a tip top brand. it is a knockoff of a harris except it is picatany ready no adapters needed. find it on amazon.

    Link

    Renegade_626
    Participant
    Member

    Can you give me the link to where you bought it at? also too i don’t mind pricy as long as it is quality,  thanks

    Link

    zachary
    Participant
    Member

    i dont know how.  just go to amazon and type in tip top bipod. look for the one you want.

    Link

    zachary
    Participant
    Member
    Link

    ztirffritz
    Participant
    Member

    I used a UTG bipod on mine. 

    Link

    fz1yamaha
    Participant
    Member

    I bought this at acadeny sports for 50$ its really lite and has adjustable legs and spikes if you screw the rubber feet up

    Link

    pbguns
    Participant
    Member

    Link

    Renegade_626
    Participant
    Member

    WOW !!!! that is TOOOO SICK, amazing. That’s is what you call a super marauder pistol. 

    Please share the specifications, thanks

    Mark

    Link

    TerryH
    Participant
    Member

     ​I love the UTG HD Recon 360 bipods. Lots of features. Very compact and sturdy. The shortest one works great on a Prod.

    http://www.amazon.com/UTG-Heavy-Duty-Recon-Bipod/dp/B018H91RV6/ref=sr_1_1?ie=UTF8&qid=1490843336&sr=8-1&keywords=utg%2B360%2Brecon%2Bbipod&th=1&psc=1

    Link

    donnyfl
    Dealer
    Dealer

    Holy smokes Terry, that’s a badass looking prod!

    Link

    TerryH
    Participant
    Member

    Thanks! It started out as a well worn used one that I bought for $200. Kinda got out of hand from there. lol…

    Link

    Renegade_626
    Participant
    Member

    Where did you buy all those parts? Amazon link’s please……LOL

    Link

    TerryH
    Participant
    Member

    Sure. Have plastic. Will buy whatever. Most of this one is an Ebay gun.

    Magpul M-Lok rail covers from Ebay…

    http://www.ebay.com/itm/381847401528?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

    Magpul AR15 hand guard from Ebay. Takes mods to make it work on the Prod.

    http://www.ebay.com/itm/311751041467?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

    ​Magpul MOE stock from Ebay…

    http://www.ebay.com/itm/172266836720?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

    UTG Recon 360 bipod from Amazon…

    https://www.amazon.com/gp/product/B018H91RV6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

    ​Buffer tube, LDC and folding stock adapter I bought used. Scope was left over from an Armada combo.

    Link

    Jacklegs
    Participant
    Member

    Terry, please tell us how you modded the hand guard and the mag pull stock. I gotta have one. How much does the modded hand guard weigh? Same question for the folding stock…Please enlighten us

    Link

    TerryH
    Participant
    Member

    The folding stock adapter is a UTG piece. Not the greatest but it’s ok. I wish there was something better that didn’t cost $250 but I’m yet to find it if it’s out there.

    ​Ebay link….

    http://www.ebay.com/itm/UTG-Leapers-Side-Folding-Stock-Adaptor-TL-K7FAD01-New-/171907777836

    As for the hand guard, ​I first saw it on a Prod in this thread on the Marauder forum. Lots of good info there. No clue exactly how much it weighs but it’s light.

    http://marauderairrifle.com/forum/viewtopic.php?f=33&t=11200

    First order of business is to drill out the heat shield in the hand guard. Those rivet holes will be used to mount it to the Prod. The hand guard is mounted backwards on the Prod from the way it’s designed to mount on an AR. I used my spindle sander with a 5/8″ sleeve to contour the ends to fit around the barrel, air res and the breach. Could easily be done with a file and sand paper. You’ll see what you need to do as soon as you begin fitting. The back will mount to the stock location on the trigger group, Just line up the rivet hole. The front attaches to the barrel band. You just loosen the band and slide it down until it lines up with the first rivet hole. You can a bolt and nut in the center rivet hole just to fill up the hole. I used a couple of Magpul M-Lok rail covers on the bottom of mine so that hole is coverd anyway. I used a 1″ Forstner bit in my drill press to drill the hole for the gauge. With the heat shield removed the w halve won’t snap together any longer so I drilled an countersunk some holes for #2 screws to attach the halves of the guard together.

     

    Link

    Renegade_626
    Participant
    Member

    Terry, you are amazing brother!!! thanks for the info on the mods, I am definitely gonna get a few parts for my marauder pistol.

    One thing that I wanted to change really bad on my marauder are the grips, I se pbguns has an AR style grip on his marauder and wonder where he got his. There are a few AR Grips that i have seen on Ebay but don’t want to purchase them and then have to return them if they don’t fit. 

    Link

    TerryH
    Participant
    Member

    Mike’s Prod is incredible as are all his guns. His work inspired much of what I’ve done on my Prod and my Armadas. The AR grips on his Prod are on a Blue Fork Trigger frame made specifically for AR grips but I don’t think they are making those trigger groups any more.

    http://www.airgunartisans.com/AABlueForkDesign.htm

    I bought the grip set that I have on mine is from a guy I found on the airguns.net classifieds. They are made of wood and are a direct replacement for the stock Prod trigger frame. $60 shipped. He makes some different styles in assorted colors and woods.

     

Viewing 18 posts - 1 through 18 (of 18 total)

You must be logged in to reply to this topic.