BIG THANKS FX USA!

Forums Dealer & Manufacturer Feedback BIG THANKS FX USA!

  • Views : 205
  • Link

    edosan
    Participant
    Member

    Maybe a few of you might remember.

    In feb I bought (after waiting like donno 3 months) my first 0.22 cal 600mm slug liner, I will not say the store, only I will say that is located in UTAH! jajaja 

    Anyway, when I got the package I found that the liner were 500mm, pellet and 2! damn! of course the vendor try to fix it and they send me another one- Big thanks on that! but when I got it, it was shooting slugs like crap! and the twist rate I measure was 1:18 or so, when the slug liner is 1:15. After asking around, the vendor say that they did not know, and they were going to fix it, and that about it…never heard from them again.

     I say hell! and I bought another Liner from Palm Beach Airguns, with cero issues, but this time in 700mm 0.22, and that liner is shooting amazing!

    In the mean time I start asking for twist rates on liners since it was imposible to know if what I get was a slug liner or another liner by mistake. And FX USA arrives with the complete sheet of twist rates and liners. So now I was sure that the liner I got was not the latest or the slug liner, what happen next is why I still use FX (and love it) buying everything (I AM NOT SPONSORED BY ANY MEANS). I am a happy client!!!

    FX USA after seen my dilema step up, and send me a PM saying basically: Edosan this might be a mistake…but do not worry, we will send you a new Liner! (at that moment I thought …ok…same story than before..but I have hopes)  since I already bought the 0.22 700mm liner, I ask FX if they could send me instead (when available) the 0.25 cal 700mm slug liner, they say yes. 

    A few weeks ago I order some parts from FX, and they say: We got your liner finally! I was so happy! and they send it to me with my spare parts. BUT when I got all, SURPRISE NO LINER!! damn! jajaja (yes it has been a pain) but hey! shit happens sometimes you know..I am old enough to understand that… ;)

    Anyway … here we go again…I ask fx Service…hey guys…what happen to my liner.?..and before getting an answer I got a shipping email from that day, and a few hours later another mail from Jessica   (fx usa) saying sorry and it was a mix up … all good!!! so today finally I have my 700mm 0.25 cal Slug liner … see patience pays! jajaja

     

    so again! BIG THANKS FX USA!!! 

    • This topic was modified 2 weeks ago by edosan.
    Link

    Bob_O
    Participant
    Member

    Jessica at UA?

    I'm still waiting in my 25 Cal barrel kit and slug liner.

    Glad you got yours!!

    Link

    edosan
    Participant
    Member

    Bob_O

    Jessica at UA?

    I'm still waiting in my 25 Cal barrel kit and slug liner.

    Glad you got yours!!

    Hello Bob, no the Jessica on UA, Jessica E. @ FX USA

    Here is an teaser, 0.25 700mm slug liner @ 164y (150m), vk 32.8gn not even tuned, I just change the .22 for the .25 and shoot.   love it. (5fpe? 😂)

     

     

     

    • This reply was modified 2 weeks ago by edosan.
    Link

    knifemaker
    Participant
    Member

    Endosan, what is the range of the two bottom targets?

     

    Knife

    Link

    edosan
    Participant
    Member

    knifemaker

    Endosan, what is the range of the two bottom targets?

     

    Knife

    All are 164 yards or 150 meters, those are some "lucky" shots ;)

    • This reply was modified 2 weeks ago by edosan.
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.