I am new to this site and would like to know what I should do about my new Benjamin Maximus? I filled it up with my Benjamin pump to 2000 psi and left it overnight. It keeps on loosing air pressure? I am new to pcp's and don't know what to do. Any advice helps! Thanks
Benjamin Maximus
- Thread starter PCPhartwick
- Start date
If you shoot it without a pellet till the reservoir is depressurized it might blow the trash out of the valve (if that is the issue) letting the valve then seat and saving you a return.
Thurmond
Thurmond
Upvote 0
Bill is right, the most logical thing to do is return or exchange it- contact the supplier and make sure you get a return label from them before you send it back. PCPs are not that hard to work on, but if it's still under warranty return/exchange is the simplest. In many cases if you open up the gun it may void your warranty. Who did you buy it from?
Upvote 0
While on the subject of the maximus Steve has a nice review and pellet test on them.
https://www.youtube.com/watch?v=TQ4Wqj9mfjo
https://www.youtube.com/watch?v=TQ4Wqj9mfjo
Upvote 0
I had a air leak problem, from the get-go with my Disco and started out differently so I can say from experience . . .
Straight to Crosman if possible.
I used one of their warranty shops first and then had to send it to Crosman to fix his repairs.
1/2 cost of the gun in shipping around
Crosman (NY) fixed it and it is good to go over a year later (held air all winter when I did not shoot it) and has spit out a bunch of pellets.
Straight to Crosman if possible.
I used one of their warranty shops first and then had to send it to Crosman to fix his repairs.
1/2 cost of the gun in shipping around
Crosman (NY) fixed it and it is good to go over a year later (held air all winter when I did not shoot it) and has spit out a bunch of pellets.
Upvote 0