Benjamin Maurader leaking air

If you're not wanting to diy, you're not too far from these guys in Greensboro are you?



http://mountainaircustomairguns.com/

Charlie Frear at Georgia Airguns might fix it. They are fairly easy to work on and parts are available from Crosman and are very reasonable.

Bob in WV

The marauder is a easy rifle to work on. Just replace some o rings and u are good. No need to send it in. Use soapy water to find leak and u can do it yourself.

Be sure to Degas it when you decide to take it apart, just saying.

The marauders are surprisingly easy to work on. Hell even I figured it out! ( lol ) I stripped mine and installed some Tim Hill parts into it ( a regulator, hammer, gauge port, some lighter springs, etc . . . . . )

Buy a few parts / tools - not a huge chuck of money:

As others have already alluded to - degas it just to be safe - degas tool available @PA and many other places I suspect

Buy some of this silicone lube -> https://www.amazon.com/Trident-acc577-Silicone-Grease-2oz/dp/B0000DCVZL/ref=asc_df_B0000DCVZL/?tag=hyprod-20&linkCode=df0&hvadid=198063634469&hvpos=1o2&hvnetw=g&hvrand=310893225741945322&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9058780&hvtargid=aud-801738734305la-343141348794&psc=1

Go to archerairguns.com and get one of his pre-packaged sets of O-Rings - you get TWO sets - wiggle room for if/when you mess up the first time.

My .02 cents advice - be sure to liberally lube ALL of the o-rings prior to reassembly. I got mine back together and its holding air just fine. Now just waiting for decent weather to return so I can work on tuning it / sighting it in.

Check this video out - I referenced it / practically used it as a "bible" the first time I took mine apart - the guy is a well known tuner ( and very good one at that ) does a really nice job of explaining everything and showing you how to both pull it apart and then re-assemble after the fact.

https://www.youtube.com/watch?v=sU_py1NN6FI

Give it a whirl - you might be surprised at how simple it actually is. I sure was.

I have Hajimoto's video bookmarked. This is the most lucid, professional video I have ever seen. Watch it twice and you will have no problems fixing your marauder. (Thanks Hajimoto!)

Wow, amazing detail. Thank you for the information. I may actually give it a try.

Click to expand...

Good for you, once you take it apart you'll be amazed at just how fast you can become knowledgeable.

I would however recommend just ordering orings from a place like the oringstore 

https://www.theoringstore.com/store/

Those packaged oring sets are way overpriced. Just use the oring list below and for the price of 2 of those packaged oring sets, you can have enough orings for years to come.

Hello, I have a .25 Marauder that is leaking. I have my gun tore apart and ready to rebuild. I was looking at the website and part numbers above and oringstore.com doesn't pull up those part numbers. I was able to locate a couple by description but some were still missing. Does anyone have the actual sizes required or maybe verify a proper rebuild kit. Its warm out right now and I've seen several ground squirrels out that need to be taken care of. Appreciate any help. 

Crosman Benjamin Marauder BP2563 / BP2564 .25 Air Rifle Full 2X Color Coded Captain O-Ring Rebuild Kit https://www.amazon.com/dp/B01AHIO51O/ref=cm_sw_r_cp_api_i_YKZkEb4ZNJWWD



ive purchased this kit before and it worked perfectly.