Benjamin Bulldog
- Thread starter K80
- Start date
i did it .. its simple, just pull the stock, undo the lever connecting rod pin and flip it to the other side .. then theres a rubber cover plug you switch to the other side ... most complicated part is breaking the stock open .. lay all the screws out in order for 'both' sides of the rear covers and the shroud ... use a plastic mallet or similar to knock the shroud forward so the rear pieces can be freed ...
...leave the 2 screws in the left side of the strap lugs so they stay in place
...remove the rear covers first, and the shroud has to be forward or off ...shroud goes on last on reassembly
...when splitting the stock leave it laying on the LEFT side and lift the right off carefully so the trigger linkage and safety dont flop out .. theres a clip in there and the way the spring is situated isnt very easy to figure out if you allow things to flop out everywhere without seeing it in place first.
..on reassembly generously lube the rail guides and oring for the shroud ..
...
...leave the 2 screws in the left side of the strap lugs so they stay in place
...remove the rear covers first, and the shroud has to be forward or off ...shroud goes on last on reassembly
...when splitting the stock leave it laying on the LEFT side and lift the right off carefully so the trigger linkage and safety dont flop out .. theres a clip in there and the way the spring is situated isnt very easy to figure out if you allow things to flop out everywhere without seeing it in place first.
..on reassembly generously lube the rail guides and oring for the shroud ..
...
Upvote 0
