So I have some Alfa precision barrels inbound for the RTI Prophet (needs a transfer hole 15mm OD) and L2 (not a problem 14mm OD). How would I index to know where the transfer port should be drilled or can the gunsmith do this on a bench?
I always machine the breech fitment first, that done minus transfer port. Fit barrel to breech and then rotate barrel 360* AND Note "IF" OR "WHERE" barrel at muzzle gets highest at 12 o'clock position. felt pin mark barrel next to receiver. Then when placing transfer port do so 180* from the mark.
FYI ....