So i received my new trigger from Baker airguns today and was excited to install it as soon as I got home from work. The trigger had a gouge and a really sharp burr on it but i didnt mind, im pretty handy with a file and sand paper. I noticed the triggers were very different, and noticed that there is a pin on the stock trigger that is not on the new one. This pin is what pushes against the trigger return spring. I went ahead and installed the 2 included screws and changed out the stock spring and trigger, but the trigger doesnt even touch the return spring and literally flops around in the gun.
I dont think this is right, im hoping I just did something wrong and am hoping for some insight from anyone who has installed this trigger in a disco. I can add pics if necessary.
For now I have put the stock trigger back in and the trigger pull is still much better. But I would really like to use the trigger I paid for, as 20 bucks for 2 screws and a spring is a little insane.
Thanks!
I dont think this is right, im hoping I just did something wrong and am hoping for some insight from anyone who has installed this trigger in a disco. I can add pics if necessary.
For now I have put the stock trigger back in and the trigger pull is still much better. But I would really like to use the trigger I paid for, as 20 bucks for 2 screws and a spring is a little insane.
Thanks!