To locate the leak take a spray bottle with soapy water and find where the air bubbles are coming from.
Let us know and we can tell you the most likely seal that needs to be addressed.
Upvote 0
Artemis PP700S-A (Found my suburban backyard carbine)
- Thread starter Florida_Man
- Start date
To locate the leak take a spray bottle with soapy water and find where the air bubbles are coming from.
Let us know and we can tell you the most likely seal that needs to be addressed.
https://airgunarcheryfun.ca/artemis-pcp-pistol-pp700sa-carbine-stock/
I suggest drilling and taping a 3rd hole to secure it more.
Cool - thanks. I didn't know Artemis had a folding stock for the PP700. And reasonably priced.
Upvote 0
Mine leaked when I tried to fill it for the second time, would not hold air. Disassembled the air cylinder. There was a white substance around the fill port, cleaned the o-ring, reassembled and it has been fine for 30-40 fills now.
Upvote 0
Mine wont fill from empty or low unless I cock the trigger also. How hard is it to take apart ?
Upvote 0
When the pressure goes below a certain point the weight of the hammer spring wont keep the valve shut.
It's not a difficult platform to work on. My air tube was only hand tight.
https://www.youtube.com/watch?v=Hnh2yxmb_bw&t=217s
Upvote 0
Excellent Florida-Man that is a very good video and much appreciated. Any links or help on O ring's to replaced stock ones ?
Thank you
Thank you
Upvote 0
https://www.theoringstore.com/store/
$11.80
Sub-Total:
$7.99
FedEx Air Special (2 Day Air):
$19.79
Total:
Upvote 0
I did some hammer spring adjustment today. 600FPS/12FPE is all I need for my yard and it gained me a bunch of shots on a fill. The bark also went down.
I did the stats for the first 47 shots since it took a dive after that. I'll still play around with it.
I did the stats for the first 47 shots since it took a dive after that. I'll still play around with it.
Upvote 0
Had it taken apart several times messing with the stock reg. Didn’t work out as planned, worked on getting back where is was. Almost there, just some fine tuning. Still thinking about putting in a huma.
After I got back to close to where is started I shot 5 shot groups. I adjusted the scope between the first 3 groups. Shot off a front bag, stock shouldered. 16 grain Air Arms.
18 yards to match with rodent kill zones in my yard.
Still shooting around 600 FPS. I will post LabRadar data in the morning
<img src="
" alt="55-A81007-2-BB9-42-E8-97-CD-1811-A684-EEE6" border="0">
After I got back to close to where is started I shot 5 shot groups. I adjusted the scope between the first 3 groups. Shot off a front bag, stock shouldered. 16 grain Air Arms.
18 yards to match with rodent kill zones in my yard.
Still shooting around 600 FPS. I will post LabRadar data in the morning
<img src="
" alt="55-A81007-2-BB9-42-E8-97-CD-1811-A684-EEE6" border="0">Upvote 0
So my internal reg became very inconsistent. This thing was very accurate and it began opening up. I tried cleaning and that didn't help. I recorded with labradar and found my fps jumping around. I did some forum reading. I love this platform. I don't have the issue others have investing money into an affordable rifle. I have a Huma and an Altaros coming. One will go in my 22 and one in the 25 cal on the way.
This is for my 22 that shoots AA 16 gr. For my use I like this PCP around 600 fps. It's used for rodent control. I have two kill zones set up at 18 yards.
I only take brain shots. With it unregulated the first 10 shots group well, then the group moved up as the FPS increases. This shift is around 1/2" or a little less.
Where I am at now is I put all the washers in the same direction.
I tried filling to 160 bar, but 150 looked a better starting point from shooting 5 shot groups from the fill point down to 100bar. And feel and sound. I couldn't use labradar for this portion.
So today I started by shooting some strings from 150 bar. The peak velocity around shot 20 is 110 bar.
This is for my 22 that shoots AA 16 gr. For my use I like this PCP around 600 fps. It's used for rodent control. I have two kill zones set up at 18 yards.
I only take brain shots. With it unregulated the first 10 shots group well, then the group moved up as the FPS increases. This shift is around 1/2" or a little less.
Where I am at now is I put all the washers in the same direction.
I tried filling to 160 bar, but 150 looked a better starting point from shooting 5 shot groups from the fill point down to 100bar. And feel and sound. I couldn't use labradar for this portion.
So today I started by shooting some strings from 150 bar. The peak velocity around shot 20 is 110 bar.
Upvote 0