Anyone using the DonnyFL extender in conjunction with a Emperor V3?

It was a year ago, and I don't have it or the rifle anymore.. It did make a noticeable difference but the overall size of both together made my sumo look tiny.. This was on a strong .30. I just picked up a diff .30 but wont have pellets until tomorrow at best and if the sumo doesn't tame it to my comfort level, I'll prob order another emperor with extension.
 
I used both on a .25 cricket, the extension made the barrel droop more than I was willing to accept. I took it off. It my be better suited for the ronin, it made the emperor stupid long. I did not really notice a differance with vs. without.

This is an good assessment of the Emperor vs Ronin when adding along the 6 inch extender. I think if you were to purchase the Emperor, then you should stick with the Emperor as your only attachment. However, I also found that the Ronin + extension was quieter than the individual Emperor, and is only around 2 inches longer than the single Emperor, and is noticeably shorter than the 16 - 17 total inches of Emperor + extension. I think the Ronin + extension is the best compromise of sound vs length. 
 
Thanks guys, mostly what I needed,



It is for a ported 260 fpe Bulldog and a Texan LSS so length and droop should not be a problem and will be used with a soundbox inside.


Now ctsshooter, my wife, as expressed by the actor playing Mickey Mantle in the movie 1961 I believe, my wife has small hands.



Thanks,



Roachcreek



I had the Ronin and wished I had the Emperor instead.











to replace the 4 inch end section, so droop and length is not a problem for three reasons, it is for inside use, most of the length is stuffed in a sound box, a