Anyone know where to buy the rubber O-ring for a Dreamline power plenum?

I always call FX USA in the morning and 9 out of 10 they answer the phone. If you haven't found what you need by tomorrow let me know and I'll pull the one I have on my dreamline and measure it for you.

Take the old one, go to an O'ring shop and buy 20 of them.

If you’re looking for the 26mm x 1mm I’ll send you a couple.

Just pm me your address and I’ll drop them off at the PO in the morning.

I just placed a order with FX USA yesterday took 3 days for Scott to get back to me not bad for these days and times I ordered a new valve and seat for my dreamtact 30 and extra orings the plenum oring by the parts diagram is a 23x2.5. Scott told me if I'd had a sales receipts he could have warranty the parts but I bought it used so that's the way it goes.

Hi jasmlowe,

Someone should be reaching back out to you shortly. It also would be beneficial to use our website customer service link especially during the holidays we can get a little backed up. We apologize for the inconvenience.

Regards, 
FX Airguns USA

Contact

Monday - Thursday 9 AM - 4 PM EST
Fridays 9 AM - 3 PM EST
Phone: +1 866 639 0772
[email protected]


Customer service Website ticket link

https://fxairguns-usa.com/service-request/

This link is for Service request 

This link is to order parts

https://fxairguns-usa.com/parts-order/

Do this:



I had a leak, so I tried adding an O-ring to where the plenum meets the bottle drop. It works.

Dang

FelixS said:

Do this:

View attachment 188675

I had a leak, so I tried adding an O-ring to where the plenum meets the bottle drop. It works.

Click to expand...

I tried adding an O-ring where the plenum meets the action but the leak has not stopped.