Hi guys, I'm afraid that this will not work. There is no room to acommodate the liner, as it is almost the same diameter as the brass barrel inlet/TP piece of a Royale. (9mm X liner diameter vs 10mm Royale barrel part.) Too little "meat" to work with the standard parts.
One way to overcome this issue is to thread the liner directly with M9x1 thread, and use a standard Royale barrel inlet. (Also M9x1 thread)
Then still a sleeve has to be made to support the rest of the liner, and to attach the outer barrel.
It can be done, but swapping liners will be over then, as you are gonna use the liner as a regular barrel, and also a lot of work is involved to make it work.
For the Boss and .30 cal Bobcat it can be made to work with the stock X barrel system.
Cheers,
Gijs