Anyone here work on brocock rifles ??

pcpfan37 · Nov 17, 2019

I have a .22 compatto that developed a leak and emptied the air tube tried to fill it and I have air leaking thru the barell at the breech

i have been told it's the valve seat causing the issue but could be wrong anyway long story short I managed to get the valve seat out of the gun

but ended up with two springs and one spacer that appeared on my bench without me seeing where they came from

so at this point I'm guessing my choices are to find a compatto guru that can put my rifle back together for me fix it myself with a little help

or send it to aoa for a reseal which they want $225 plus shipping to perform

I love the gun and it shoots fantastic however I think it's kinda stupid to have to send it in for a $225 repair every time it springs a leak

pretty soon I'd have the cost of another rifle in my gun lol

anybody here that might be willing to guide me in the right direction with it ?? I have no problem working on my own rifle just need some advice

on where my mystery parts belong lol

thanks for any help guys

pcpfan37

vmaxpro · Nov 17, 2019

1574032462_21076328395dd1d44e9e62c0.53801022_B81B8B66-3D5B-42D9-A74B-EAA44AD1B932.png

Do u happen to see them on there? Brococks are very simple to work on. I’ll try my best to work you through it!

pcpfan37 · Nov 17, 2019

1574035091_8618481745dd1de93314ac6.58727576_IMG_0220.JPG

Here are the parts that magically appeared on my bench minus the steel spacer

if im not mistaken the tiny spring goes in the bolt handle it shows a spring on the parts picture but I have never found a parts list for the rifle

to confirm that any ideas where any of them go ??

Thanks a lot

pcpfan37

vmaxpro · Nov 17, 2019

One piece of advice, that part num 44, be sure to loctite it. Ive had it come loose and it was a accuracy head scratching nightmare lol

skohl · Nov 17, 2019

Try Scott Schneider - Motorhead on this forum and GTA. I live in the bay area and all the local airgunners use him for repairs, tuning, etc. I had him install a huma regulator in my Compatto and give it a tune. Very reasonable and fast. I've sent him 4 guns over the past year and a half.

DrPutz · Nov 18, 2019

The big silver thing is the valve spring cover (#9). The big spring does not look stout enough for the valve spring that they put in (#8), but might have been replaced by another user. You don't need much valve spring, once pressurized. However, you do need to cock the gun to pressurize with a weak valve spring (takes the load off the valve pin).

The black thing looks like the probe alignment - next to #30. Not sure where the tiny spring came from.

pcpfan37 · Nov 18, 2019

Im almost positive the tiny spring is number 39 and goes in the bolt handle but not yet 100 percent sure I did take that bolt out tho and then that spring appeared on the bench I'm guessing from there

going to send the rifle to Motörhead so he can work his magic on it Hopefully I'll get it back shooting soon I really love the rifle it's awesome !!

Search

Search

Anyone here work on brocock rifles ??

pcpfan37

Member

vmaxpro

Member

pcpfan37

Member

vmaxpro

Member

skohl

Member

DrPutz

Member

pcpfan37

Member