Any Vulcan2 owners?

Forums PCP Airguns Any Vulcan2 owners?

  • Views : 408
  • Link

    LTU-013
    Participant
    Member

    Vulcan 2 in a box has a fill station

    What standard is that?

    what the purpose?

    It is not SCBA, it is not Carbon tank or paintball tank

    Thread is 22.7mm, short hose, no quick fill adapter 

    Scratching my head

    Link

    jungle
    Participant
    Member

    I believe it has been included since vulcan1. Dont know which gen. I have gen 4 and never use mine.

    It seems like 300 DIN male to 1/8" bspp female.

    https://www.edgunwest.com/store/p70/Edgun_Fill_Station_%232.html

    That looks close to the vulcan fill.

    Link

    LTU-013
    Participant
    Member

    Thanks, it looks same thread as Vulcan

    Useless in my case, I'm using SCBA

    Link

    airgunmike56
    Participant
    Member

    The owners book says nothing about it?

    After I read the post I am looking at mine and scratching my head to.

    Looks pretty cool what ever it is. LOL.

    Mike

    Link

    LTU-013
    Participant
    Member

    Exactly Mike,

    It looks very well made 

    Quality piece, but….. what for????

    with tiny short hose

    Link

    milacik
    Spectator
    Spectator

    Most people in the world use scuba diving DIN 300 cylinders, I have a small 300bar 3l buddy bottle in the shed, then 2x larger 220bar DIN bottles in the garage. 

    A hw100 fill probe tip is compatible with the Vulcan too if you need extra. It comes with a brass fill probe tip as well should have been on the picture. you left it off the photo. The knurled top unscrews so after filling you can dump the hose internal pressure so you can pull the hose out of the fill port without damaging probe o rings 

     

    it it is very compact and robust smaller than the edgun version and also spins around. I think I has slow fill feature built in too so the pressure won’t rocket within seconds in the gun.

     

    it is nice that the Vulcan comes with all these what normally you would have to buy isn’t it. 

    Maybe you can fling it on eBay. some Hunter will buy it as it is good quality, Hunters carry mini buddy bottle around with them, are you bench shooting/ filling from one big single tank only right.

    Link

    LTU-013
    Participant
    Member

    Thanks, Milacik

    I was hoping to use CF paintball tank as a spare, but paintball tank has 18mm thread.

    I'm mostly shooting around the house, using 88 cu ft CF tank, don't have to move far.

    It is good to know HW fill probe same as Vulcan, will have to get one just in case.

    Looks like Hatsan, Hammerly, Evanix probe is a little bit thicker

     

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.