Any ideas for attaching a bipod to a wolverine B

Forums General Discussion Any ideas for attaching a bipod to a wolverine B

  • Views : 975
  • Link

    Marksman3006
    Participant
    Member

    Just what the title says guys. I have a really nice Atlas bipod that has seen use on many rifles and increasingly more pcp airguns. This hobby is addictive……but Im having fun. Been scratching my head on this one. I know I could mount a sling swivel stud and go from there with a harris…..or a picatinny adapter that mounts to the swivel. I have even considered mounting a rail myself.
    Has anyone ever seen a bottle mounted rail? Is this even a good idea? Ive just been thinking about it….and I can clearly see a quick detaching clamp design….with padding on the clamps….in my head but not sure if anyone anywhere even makes something like that. Any and all ideas welcome.

    Link

    Fuwenxu
    Participant
    Member

    measure OD of air tank on wolverine, then get a same size of Tactical Scope Adapter to mount the bipod

    https://www.amazon.com/NcStar-Tactical-Adapter-Weaver-MRD34/dp/B003OBGEPW/ref=sr_1_2?ie=UTF8&qid=1470952946&sr=8-2&keywords=Tactical+Scope+Adapter

    Link

    Dirte
    Participant
    Member

    I did this to my FX Royale. I used some heat shrink initially over the clamp. The problem with the heat shrink was, it barely touched the barrel. I was afraid it may throw the accuracy off. So I took it off. May work with other bottle guns. I’m watching the clamp it shows no sign off marking up the bottle. Works pretty good moving the bipod forward. Just a thought as one solution.  Here is the adapter used. https://www.amazon.com/gp/product/B00NVK0RR2/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1

    Link

    gorgata
    Participant
    Member

    as for your idea for a bottle mounted rail my father came up with a vary interesting idea using  pvc pipe with the right diameter you can kinda use it like a clip on or sleeve for the bottle

    ​its a neat idea idk how it look but wonce you get the pipe cut and fitted its should be ez mounting an adapter like dirt showed above

    Link

    Marksman3006
    Participant
    Member

    Good suggestion guys. I like both Dirte and gorgata’s suggestions. I will experiment with both.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.