I'm sure most of you know by now, (and are probably sick of it), I'm having accuracy issues with my new Impact MK2. I've tried all sorts of tuning combinations, but still have groups trying to form then POI shifts everywhere.
I have been dry cleaning the barrel and this morning tried a thorough wet cleaning w BoreKleen and Kroil 50/50. Man slivers of lead shining off a coal black patch.
Then I checked the moderator end cap and this is what I saw:
Top: what was poured out of the moderator end cap
Second: closeup of lead particles in end cap big ones and littler ones
Third: looking down the moderator from back to front
Last: what appears to be lead on edge of exit muzzle hole from inside the moderator
Anyone?
Thanks,
KP
PS: This is a picture of the Gen 1 end cap for comparison. I see no sign of clipping also a few specs of black came out when I tapped it on white paper wouldn't have shown up in a picture very well.
I have been dry cleaning the barrel and this morning tried a thorough wet cleaning w BoreKleen and Kroil 50/50. Man slivers of lead shining off a coal black patch.
Then I checked the moderator end cap and this is what I saw:
Top: what was poured out of the moderator end cap
Second: closeup of lead particles in end cap big ones and littler ones
Third: looking down the moderator from back to front
Last: what appears to be lead on edge of exit muzzle hole from inside the moderator
Anyone?
Thanks,
KP
PS: This is a picture of the Gen 1 end cap for comparison. I see no sign of clipping also a few specs of black came out when I tapped it on white paper wouldn't have shown up in a picture very well.