I think there will be some red faces as I believe Altaros to not be an exagerator. Soon we will see.
Upvote 0
altaros m24 most accurate factory airgun in the world
- Thread starter 1shot1kill56
- Start date
G
Guest
Guest
First of all, preproduction claims are something that really need to be taken carefully,.....anybody here remembers the Rogue ? based on pre-production it was going to be the gun that ended all other guns and the new baseline for the future, Post production, nothing special, tons of problems, GEN II had to be released in short order, still the gun was not good enough to last more then what 2-3 years on the market ?
Careful of Pre-production hype.
So many questions still about this gun,......How much air on board ? ........how many actual shots out of one fill ?
Is it the actual perfectly machined bullet that makes the gun accurate ? ...how much those bullets even cost ?
How long you need to wait between shots ?
Careful of Pre-production hype.
So many questions still about this gun,......How much air on board ? ........how many actual shots out of one fill ?
Is it the actual perfectly machined bullet that makes the gun accurate ? ...how much those bullets even cost ?
How long you need to wait between shots ?
Upvote 0
Wow? that is all you have to say?
Let me add....
WOW, He's obviously never talked to any Phd, Dr, or nurses, or his dad. obviously he's had more knowledge than anyone that was born before him.
Upvote 0
I talked to altaros.The m24 does not use cartridges.If you look at the bolt it is a pretty large diameter. Here is the cool part.when you fire the gun it only uses the air in the bolt,so same pressure and same volume every time.Guns with valves with hammers that strike the valve stem ,Can have slightly inconsistant air release depending on hammer type.Iy you have a cylinder shape hammer (very common) fx even uses them ,when they are in the cocked position they tend to cante this can cause slight variations in hammer speed,so keep them oiled .Edgun uses a hammer like a revolver firearm, It only has one point of drag ,which is the pins it swings on .Many of you that have an edgun know how consistant your shot strings are.We can't put daystate electronic guns in this category. They are in a league of there own, now edgun is using hammerless in there new leshiy 2, and i would think the rest of their guns will follow. But back to the m 24.When you pull the trigger the valve opens releasing all the air in the bolt,they say close to perfect volume and pressure everytime due to that reg.If you watch the 475 yard video , you can see the slugs hitting close to the same spot (lower right corner) consistantly.I told some of you i would call them and there is the answer if the use cartridges.Great concept.Reliable who knows.
Upvote 0
Wrong again... If it would release all air inside bolt it would be just simple dumpvalve we seen plenty on different guns and nothing to patent. Ondrej him self have said M24 dosent dump everything in bolt and therefore isnt just stupid bad effiency dump valve. It remains unknown to this day how do they close that plenum but we will see when it hits market....
Upvote 0
Can you shoot a 200 yard group for us with slugs in 25 cal or 22 cal.I understand that no matter what you will have a comment ,because you feel threatened by my knowledge and your part of that fx crew.And being that can you please show us your 200 yard group.I will take a guess at how big i think it will be with an impact ,4 inches.Now please get out there film it all and make me wrong.And this is not stated with any animosity.You are combative. And im shooting my 100 yards group with my junk artemis guns today.Wait till you see the speed and accuracy.When i post people will see my knowledge and what can be done with a 250 dollar gun.Im looking forward to your comments.
Upvote 0
And by the way next year i will be at EBR i dont consider fx any competition for my guns , but daystate will be they won the biggest comp by the biggest and most respected store.Airguns of arizona.Right now daystate is the world champ.Lets see what next year brings.I know my guns well i shoot everyday.
Upvote 0
Thats actually really funny seeing I dont own any FX guns or plan to buy one plus with included the fact I probably own worlds highest power artemis gun in 22cal...Maybe you should go get some mental help since you seem to be rather narsistic person combined with pathological lying.. none of the things you said in this thread is true and its rather worrying...
Upvote 0
and if you can count i shot 3 shots the shot on the bottom was previous .but you can look at the top group also that was 4 shtots and you cahn see were the wind blew the shot over.But wait how about we do what steve at aeac does in his fx reviews he shoots 5 and only count 4 .If we do that my to group was one inch.So thankyou for bringing that to light.Its official my aeac type group is one inch.Im taking a bow ,THANKYOU THANKYOU THANKYOU.I want to take this time to thank myself for being such a great airgun smith.And i want to thank every body that make nasty comments it just ups my game.
Upvote 0
G
Guest
Guest
Good god "Knowledge boy" in over 15 years on Airgun forums I've seen people making a complete fools of themselves but you my friend take the cake,...competition isn't even close 
Upvote 0
Ok good, you've taken your bow. Maybe now consider walking off into the wings and remaining silent until you can show off you skilz at EBR 2022. I look forward to seeing you at the top of the podium.
Upvote 0
Yeah so you have a 3 shot group and if you didn't count it would be a inch group. Nice 2 shot group lol that's the dumbest thing I've heard all day why don't you just go away and shoot some minute of mud you aren't helping anyone here all I here is I did this and I did that and I'm just great . You must have the biggest head in the world go take your artemis and 15 inch barrel and shut up at least you'll be a good laugh at EBR 2022
Upvote 0
Been following this tread, and the only way to to understand the Op is to apply Brandolini's law.
Upvote 0
In your video you said this group is your first group, and "if you don't count the flyer then it's a 1.5 inch group" so which is it? That low shot is from another group? Or it's a flyer?
You measured the other group the same way, can't be both. (A shot from another group and a flyer from this group)
And I'm not the one making these claims, you are. So I have nothing to prove to you.
Ps you took 6 shots at each target.
Upvote 0
Is it just me or does this guy shoot 6 shots at each target then there are 5 holes in one of them and 4 holes in the other then you don't count the fliers and that's 1.5inches except the calipers show 1.59
Upvote 0
G
Guest
Guest
I was thinking exactly the same,....like the mud bank shooting I bet the actual groups are in the 20" zone minimum,....otherwise where is the holes from the other shots ?
This guy think we are all stupid ?
Upvote 0