Become an AGN forum member to be included in our multi-thousand dollar Monthly Airgun Giveaways! Winning is as easy as picking a number, no strings attached! This is our way of thanking you for being a part of the worlds biggest airgun forum. Yours truly, Michael Wendt - Owner.
Join HERE

Air Venturi Wingman Jubilee Valve – O-Ring size?

Forums Tanks, Pumps, Compressors Air Venturi Wingman Jubilee Valve – O-Ring size?

  • Views : 169
  • Link

    Saltlake58
    Participant
    Member
    United States
    Accuracy: +64

    Anyone know the O-Ring size on an Air Venturi Jubilee Valve, 7/8 inch?  Brandy Spanking new 74cf Wingman tank, filled and O-Ring blew.  I've contacted PA, but does any one know the size or a decent way to figure it out?

    many thanks!

    Link

    gurwery
    Participant
    Member
    United States
    Accuracy: +1

    Have you called or emailed Air Venturi, I would give that a try. They may send you one, who knows.

    Good luck to you!

     

    Link

    Saltlake58
    Participant
    Member
    United States
    Accuracy: +64

    Contacted PA last night.  Giving them a chance since they were the vendor I bought from.  AV is next!

     

    Link

    Humdinger
    Participant
    Member
    United States
    Accuracy: +156

    The o-ring size for a 7/8-14 valve is a 116.   I'd buy 90 durometer buna o-rings rather than 70 durometer if I was ordering some.  Make sure your valve is tight enough to not see any of the o-ring which means no visible gap between the valve and the tank.  You should only tighten it hand tight.

    Link

    Saltlake58
    Participant
    Member
    United States
    Accuracy: +64

    Many thanks!!!!!!!!!!!!  I'll find some asap

    Link

    Saltlake58
    Participant
    Member
    United States
    Accuracy: +64

    Humdinger – thanks for getting back, but after measuring, it's closer to a 212.  I have the good old Harbor Freight collection.  The 116 is too small, the 212 is much closer.  Thanks for getting back though, made me go look and figure it out!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.