AGT URAGAN is coming !

Forums PCP Airguns AGT URAGAN is coming !

  • Views : 9033
  • Link

    DirtyDovi
    Participant
    Member

    orion

    DirtyDovi

    I knew I shouldn't have revisited this thread.. 

    *Scrolls down*  Aw man,  there's a compact version too?!  Killer!! 
    I'm usually of the mindset that the more on board air capacity the better, 
    but, I'm also a big fan of – the smaller the bullpup the better, so, I'm at a crossroads..  

    *Scrolls down*  Aw c'mon!  *sees the laminated versions* 
    I say it over and over and over again..  I Almost Always go with composite stocks 
    since they're light weight, and super simple – matte black..  
    I'm not a fan of wood stocks at all..  But Laminate on the other hand..  Hell yeah! 
    And these laminate stock options look absolutely awesome!

    Being 'color blind',  I'd want to opt for a multi-tone black/gray combo/scheme.. 
    I'm pretty sure that'd look pretty killer!  

    ๐Ÿ‘๐Ÿ‘ 

    Sam –

    Sam, LOL the same happens to me. Oh boy I'm seriously thinking selling my Taipan

    Erlis,  I hear ya brutha!  I might even have to start considering tapping into my camera-lens-fund now..  
    Selling your Taipan?  Pssst,  I'll give you this crispy new dollar bill?!  haha  

    Just when I was thinking that this might be the year I'd finally jump on an Impact or at least custom FX 
    like a "Dream-Tac-Bottle-Compact" . . . If it's even possible to throw together that combo.. 

    Ahhhh choices choices..  ๐Ÿคช

    Link

    DirtyDovi
    Participant
    Member

    kzz1kaw

    DirtyDovi

    I knew I shouldn't have revisited this thread.. 

    *Scrolls down*  Aw man,  there's a compact version too?!  Killer!! 
    I'm usually of the mindset that the more on board air capacity the better, 
    but, I'm also a big fan of – the smaller the bullpup the better, so, I'm at a crossroads..  

    *Scrolls down*  Aw c'mon!  *sees the laminated versions* 
    I say it over and over and over again..  I Almost Always go with composite stocks 
    since they're light weight, and super simple – matte black..  
    I'm not a fan of wood stocks at all..  But Laminate on the other hand..  Hell yeah! 
    And these laminate stock options look absolutely awesome!

    Being 'color blind',  I'd want to opt for a multi-tone black/gray combo/scheme.. 
    I'm pretty sure that'd look pretty killer!  

    ๐Ÿ‘๐Ÿ‘ 

    Sam –

    Black synthetic stock is only available right now. The rep at iwa said the stock was made for the show only. If there is enough interest, they may consider making them. I’ll take the synthetic please๐Ÿ˜Ž

    Thanks for the heads up bro! 
    No real worries about this kid getting anything other than black/synthetic though..  That's really the only type of stock I opt for. 

    I still have to shoot either soft-touch paint  or  spray bed liner over my Artemis P15 so it won't stand out so much.  [Brown wooden stock]  ๐Ÿ˜ƒ

    Link

    kzz1kaw
    Participant
    Member

    Start looking at the classified ads for some killer deals๐Ÿ˜Ž

    Link

    orion
    Participant
    Member

    DirtyDovi

    orion

    DirtyDovi

    I knew I shouldn't have revisited this thread.. 

    *Scrolls down*  Aw man,  there's a compact version too?!  Killer!! 
    I'm usually of the mindset that the more on board air capacity the better, 
    but, I'm also a big fan of – the smaller the bullpup the better, so, I'm at a crossroads..  

    *Scrolls down*  Aw c'mon!  *sees the laminated versions* 
    I say it over and over and over again..  I Almost Always go with composite stocks 
    since they're light weight, and super simple – matte black..  
    I'm not a fan of wood stocks at all..  But Laminate on the other hand..  Hell yeah! 
    And these laminate stock options look absolutely awesome!

    Being 'color blind',  I'd want to opt for a multi-tone black/gray combo/scheme.. 
    I'm pretty sure that'd look pretty killer!  

    ๐Ÿ‘๐Ÿ‘ 

    Sam –

    Sam, LOL the same happens to me. Oh boy I'm seriously thinking selling my Taipan

    Erlis,  I hear ya brutha!  I might even have to start considering tapping into my camera-lens-fund now..  
    Selling your Taipan?  Pssst,  I'll give you this crispy new dollar bill?!  haha  

    Just when I was thinking that this might be the year I'd finally jump on an Impact or at least custom FX 
    like a "Dream-Tac-Bottle-Compact" . . . If it's even possible to throw together that combo.. 

    Ahhhh choices choices..  ๐Ÿคช

    Bro, that Taipan is so attached to me that has always been on my avatar, I'll really hate selling it! I'm seriously considering buying everything else… this gun is driving me nuts…

    Link

    marlonlayton
    Participant
    Member

    My .22 Uragan arrived today!  Super impressed with build quality and accuracy so far…One ragged hole accuracy at 40 yards…going to stretch out to 50 and 75 yards tomorrow…over 200 shots per fill ๐Ÿ˜ฎ….highly recommend this gun!!!

    Link

    yenniedn
    Participant
    Member

    Nice, Marlon!  Can you tell me the overall length of the rifle?  If you got your AGT Vulcan bullpup, how does this Uragan compare to that length and weight wise?

    Btw, your post probably just cost me about $1700…thanks.

     

    Link

    yenniedn
    Participant
    Member

    I checked the talontunes site . . . and the Uragan is listed at 40" long?  Is it really over 10" longer than the Vulcan2?  That's a lot!  It doesn't look 40" long so I'm hoping the site is wrong…

    Link

    marlonlayton
    Participant
    Member

    I believe the official length is 33 inches or 830mm.  Build quality feels awesome and it feels heavier than my Vulcan 4…about 7.5 lbs undressed.  Check out this awesome review which should answer most questions…if you love your Vulcan 4 then this Uragan is a no brained!!

    Link

    Broozer
    Participant
    Member

    Oh snap!!!!

    There goes my tax return!

    Gabe

    Link

    scubajeeper
    Participant
    Member

    Broozer

    Oh snap!!!!

    There goes my tax return!

    Gabe

    Return? Explain this concept to me please. ๐Ÿค”

    Link

    Broozer
    Participant
    Member

    I love the 200 shots per fill.  Must be a pleasure to shoot.

    scubajeeper

    Broozer

    Oh snap!!!!

    There goes my tax return!

    Gabe

    Return? Explain this concept to me please. ๐Ÿค”

    really… it's Friday dude… Crack one open and enjoy…

    Gabe

    Link

    Roywh1
    Participant
    Member

     

    Just got my new Aztec 5.5-25×50 FFP IR scope, Atlas Bipod and DonnyFL Ronin all installed on my .30 cal Uragan!!! Cant wait to get outside and get some groups to post but the weather here has been horrible the past few days. 

    So far I've been loving the gun. Squirrels in my backyard do not like it so much…lol

    Link

    Wiseguy
    Participant
    Member

    Cant wait to use mine either! I got a .25

     

    Link

    kaylaindy
    Participant
    Member

    The SK19 was on Utah Airguns for pre order…then it vanished off the site.

    I wonder what I should spend my SK 19 money on?…

    Duh:  Uragan .177,.22,25,.30 cal at Utah Airguns

     

    Link

    chilihead
    Participant
    Member

    Hi, I bought URAGAN (standard) and I have noticed around the valve of air tank that there are points without resin (a few around 1-2mm diameter). What do you think about it? I received an email from Airgun Technology that "It is absolutely savety!".

    To URAGAN users. Can you check your air tanks? Below picture of the problem.

    • This reply was modified 3 months ago by chilihead.
    Link

    tsakula
    Participant
    Member

    it looks good. dont worry

    Link

    chilihead
    Participant
    Member

    I feel much better now. Thank you

    • This reply was modified 3 months ago by chilihead.
    Link

    Michael
    Keymaster
    Keymaster

    For those of you that have the .25 or .30 long versions:

    • Is the hammer slapping the valve really loud?
    • Does it require an additional silencer to be backyard friendly?

    I got the .22 Compact & the hammer slap is not very obnoxious, but it is quite loud without a silencer.

    Link

    riazp
    Participant
    Member

    Hi Michael,

    I have the .25, running the 25.4 jsb at 890 FPS. The hammer slap at this speed is very manageable and not obtrusive. The gun came shooting at 940 FPS, at that velocity the slap was louder but nowhere near the levels of the Vulcan gen4.

    Imho the gun needs a silencer in .25, I slapped on a spare Hugget snipe/standard with .25 inserts and end-cap, it’s a little narrower than the shroud but it sure works well, poi moved down about 7mm at my 35 yard zero, accuracy is still great. 

    Link

    Michael
    Keymaster
    Keymaster

    riazp

    Hi Michael,

    I have the .25, running the 25.4 jsb at 890 FPS. The hammer slap at this speed is very manageable and not obtrusive. The gun came shooting at 940 FPS, at that velocity the slap was louder but nowhere near the levels of the Vulcan gen4.

    Imho the gun needs a silencer in .25, I slapped on a spare Hugget snipe/standard with .25 inserts and end-cap, it’s a little narrower than the shroud but it sure works well, poi moved down about 7mm at my 35 yard zero, accuracy is still great. 

    Good to know.  Have you tuned either the Vulcan or the Uragan to shoot the 34g JSB's?  I'm curious how the hammer slap compares.

Viewing 20 posts - 81 through 100 (of 109 total)

You must be logged in to reply to this topic.