Kalibrgun Cricket II Tactical .30 + Share n' Compare + AEAC video + RDW!!!

Great review on the Aeac vlog and really appreciate all the member comments regarding their experience with kalibrgun cricket 2 tactical . This or the delta wolf may be a good alternative to my Daystate Wolverine .303 and only 10 ft lbs less than the wolverine , should be enough power , get a ton more shots ( regulated ) and be way shorter in length while still being back yard friendly . I think I want one in .30 cal .
 
Awesome I’m in the Medina area which gun are you shooting

I just got the Argus 60 in .30cal, unfortunately things have not been so good out of the box. The gun was only shooting at 690fps with JSB 44.75gr pellets. With the hammer spring at the max, I only got 790fps. So I just disassembled the gun and adjusted the regulator, so hopefully today I can put some rounds through it and hope they perform as expected. I also have the DonnyFL adapter so I can throw on my Ronin if it's still a bit loud.

I also have two Benjamin Bulldogs .357s, but they are 2-4 MOA guns at best, and I am seeking more accuracy.
 
I use old and new magazines in my 25. At first I has cycling issues. I diagnosed the problem as some strange leverage / timing

In the picture below if I cycle normally (not too slow, not too fast) holding the red area I don't get any problems with new or old mags.

If I get into the yellow area I will get problems. I think it causes the cycle to slow down when I use that area.

The issue is usually from cycling too slow.

I can also say after shooting several tins through it the problems has greatly reduced. I can't remember the last time I had a cycling issue now.



<img src="" alt="IMG-6183" border="0">

Might need to adjust the drag on the magazine the way Michael was showing in our video. He was having the same issue until he completed the process.

Steve
 
Thanks for the vlog guys . This question is for Michael, you mentioned about laminated stocks for the cricket II , where might I ask ? TIA

AoA just yesterday received the picture pack from Kalibrgun of the laminated stock options, of which I've included in the full review. I assume since they're the Kali importer now, that's where you'll find them.

Steve
 
I enjoyed this format, and the interaction. You both brought good insight to the table, and reminded each other of talking points. I would like to see yall compare the Argus 60 in 22 to the C2T 60 in 22. After your comments on the safety, I lean towards the Argus. Argus has truely ambidextrious safety ..That, and i like the Argus magazine system better i think. It will be touching my cheek, and it looks like the C2T's magazine would require me to break cheek weld to index the mag, where the Argus magazine has rotation internally, allowing a left hand shooter to keep their cheek weld while cocking the gun. I plan on buying 2 of the exact same gun, just not sure if it will be C2T 60, Argus 60, or Vulcan 3 (700mm). Those are the 3 i have it narrowed down to tho. This vlog has brought me some great info, and i appreciate you both for taking the time to do this.

Thanks for the feedback on this new vlog format, I'm really liking it too. Just a heads up, next month Tyler Patner (Air Venturi Product Manager) will be hosting one with me on the Avenger 🕺... I'm pretty excited, lol.

Steve 
 
Did the magazine lever annoy you guys? Or did you get used to it. Seems like it’s a little bit fiddly trying to get the magazine lined up with the retention lever. Overall though they seems very nicely made. 
thanks for your reviews.

It didn't annoy me, no but I wasn't trying to manage it off the bench either, had I... yes, I probably would have gotten a little frustrated with it, lol. I'll discuss further in the full review 👍

Steve
 
Hello guys as I have mentioned I have the .30 and the compact.22 . I have been testing slugs and I noticed with the.217 size I am getting a lot of lead fouling and I decided to do some investigation and what I discovered is the CZ chocked barrel is actually is .213 so I have bought NSA 215.5 and they Leed into the barrel very nice l will attach photos of a slug before and after 
D6D7D4D2-B487-4731-8B82-AEB3DDF3903B.1643322842.jpeg
ECC44745-1E30-441F-982E-816B9420E92E.1643322844.jpeg

 
To answer your question most air gun barrels are chocked for the simple purpose to help with the accuracy for pellets and there inconsistency of sizes. So for getting a slug to preform really well in a chocked barrel usually it takes a lot of testing to get really awesome results but with that said you can usually get excitable results in most cases I just want a repeatable accuracy so this why I go as far as I do.