Kalibrgun Cricket II Tactical .30 + Share n' Compare + AEAC video + RDW!!!

Did the magazine lever annoy you guys? Or did you get used to it. Seems like it’s a little bit fiddly trying to get the magazine lined up with the retention lever. Overall though they seems very nicely made. 
thanks for your reviews.

I have seen one of the Kalibrgun guys remove and reinstall a magazine while shouldered. The guy was like Houdini! 

I will say that the "manual" rotation setting (middle position) has come in handy a few times when I just wanted to load 1 extra pellet without removing the mag.
 
  • Like
Reactions: jura1976
I use old and new magazines in my 25. At first I has cycling issues. I diagnosed the problem as some strange leverage / timing

In the picture below if I cycle normally (not too slow, not too fast) holding the red area I don't get any problems with new or old mags.

If I get into the yellow area I will get problems. I think it causes the cycle to slow down when I use that area.

The issue is usually from cycling too slow.

I can also say after shooting several tins through it the problems has greatly reduced. I can't remember the last time I had a cycling issue now.



<img src="" alt="IMG-6183" border="0">
 
I have 2 cricket tactical guns and truly am pleased with therm . I did a little research on my magazine issue and found that in both guns they had 1 area that was slightly flat on the other edge . I installed the magazine in and cycled it with no ammo and found this is what is causing the rough cycling I will straighten it out today and let you guys know if the problem is fixed 


 
Forgot to mention that I decided to detune the .22 caliber a bit. Check out the difference in shot count and accuracy! 🦾

Screenshot_20220114-145721_Drive.1642193861.jpg
20220113_140354.1642194171.jpg

 
I enjoyed this format, and the interaction. You both brought good insight to the table, and reminded each other of talking points. I would like to see yall compare the Argus 60 in 22 to the C2T 60 in 22. After your comments on the safety, I lean towards the Argus. Argus has truely ambidextrious safety ..That, and i like the Argus magazine system better i think. It will be touching my cheek, and it looks like the C2T's magazine would require me to break cheek weld to index the mag, where the Argus magazine has rotation internally, allowing a left hand shooter to keep their cheek weld while cocking the gun. I plan on buying 2 of the exact same gun, just not sure if it will be C2T 60, Argus 60, or Vulcan 3 (700mm). Those are the 3 i have it narrowed down to tho. This vlog has brought me some great info, and i appreciate you both for taking the time to do this.