AEAC's got a Neutron Star! Whose ready for pics, vids, & an RDW!!!

Jump to latest Follow Reply
Mr. Steve, 

I was just telling my best friend last night about this rifle and how it looks like one of the few Hatsan's 

whose magazines can definitely fit at least short slugs like the NSA's. Lo and Behold I just noticed to my

surprise this is the next RDW, so I am seiked. I believe this rifle also comes with a single shot tray
Click to expand...

The single shot tray is the worst I have ever seen. It doesn't fit the receiver side to side. Or on the bottom side. There is a 2mm gap under it in addition to not being wide enough. But one for the FX crown is easily adapted
1f609.svg


1581002548_15629151875e3c2f345dc021.87688195_DSC_0232.JPG
1581002578_10276517095e3c2f522a3fe2.42638019_DSC_0236.JPG
Click to expand...

Mine fits with a lot of play too, as does the magazine. But that doesn't seem to hurt accuracy, it may actually improve it as it does the ease of forward cycling with the mags. I did notice that the Baracuda domed don't feed well at all with the mags causing flyers, but everything else feed well.

But yeah, this magazine design was borrowed from FX, so it's no surprise their shot trays are adaptable 😊
 
Upvote 0
Click to expand...

I have to say I do like the magazines. And the fact that my two hatsans use the same size magazine as well.



That does make sense that they got the design from FX. The grooves cut in the front are the exact same size of both magazines FX and Hatsan. Plenty of capacity length for slugs as well 🙂 I think I measured 13mm. Don't quote me on that though.



Some body know how degacing a hatsan neutronstar? Safety mode thank
Click to expand...

Slightly unscrew the air gauge on the under side
 
Upvote 0
No barrel should look like that no matter the brand it is plainly a defective unit. The barrel should be smooth throughout it's entire length.
Click to expand...

Performance testing showed it to be far from defective... somewhat of a magic barrel rather. It's quite special actually. 

Steve
Click to expand...


That's crazy it would look like that and shoot that good. Hard to complain about that. Mine shoots OK with many pellets but has too many flyers.
 
Upvote 0
I got mine for $536 shipped NIB, so I can't really complain 😂 

Some of the machining wasn't so hot. I did take some sharp edges off here and there. But overall everything has looked quite good on mine. And I can say that for real, because it is completely disassembled.



Probe is currently being sleeved up. From 177 to 22 caliber. And a 7" shorter, thinner, and lighter barrel is being made for it. I think 7.5lbs or very close with scope is within reason. 
 
Upvote 0
No barrel should look like that no matter the brand it is plainly a defective unit. The barrel should be smooth throughout it's entire length.
Click to expand...

Performance testing showed it to be far from defective... somewhat of a magic barrel rather. It's quite special actually. 

Steve
Click to expand...


That's crazy it would look like that and shoot that good. Hard to complain about that. Mine shoots OK with many pellets but has too many flyers.
Click to expand...

This one didn't shoot any pellets well at 50 & 100 except the JSB Redesigns, sort of. It did however do great with 3 different slugs at those ranges. Steve
 
Upvote 0
I've been looking for a slug gun and was considering an Impact but really don't want to spend 2K on it. Is this Hatsan on par with accuracy out to 100-150 yrds with the Impact? Any advise is appreciated
Click to expand...

While there's nothing out there really that can compare with the whole package ya get in an Impact for $2K, I did put 4/5 FX Hybrid slugs in a 3/4 inch hole at 100 yards in the wind with the NeuteonStar yesterday, and it shoots the NSAs at about 1" in the same windy conditions. Steve
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu