Two weeks ago I got a message from Alsafe China: do you like to test our 700cc 300 bar carbon fiber bottle? Didn’t have to think long about that 
first one with a 700mm barrel:
Second one with a 600mm barrel:
Bought 480cc and 580cc 300 bar tanks from them before and after some chatting with them they told me a 700cc was coming. I helped them a bit with sizing them correctly so it will fit and it turned out great These bottles are sized slightly smaller (~59mm) than the regular Inocom bottles (~61mm), this helps with getting some extra clearance between the barrel and bottle in the case the mouth isn’t 100% straight.
They are now available is what I understood so contact them if you want to make an order. Keep two things in mind: use a 300 bar valve, not a 250 bar valve! And slowly apply pressure on the first fill, all walls and seals have to settle under pressure and it’s better to get a oring pop out at 50 bar than at 250 bar
first one with a 700mm barrel:
Second one with a 600mm barrel:
Bought 480cc and 580cc 300 bar tanks from them before and after some chatting with them they told me a 700cc was coming. I helped them a bit with sizing them correctly so it will fit and it turned out great
These bottles are sized slightly smaller (~59mm) than the regular Inocom bottles (~61mm), this helps with getting some extra clearance between the barrel and bottle in the case the mouth isn’t 100% straight.They are now available is what I understood so contact them if you want to make an order. Keep two things in mind: use a 300 bar valve, not a 250 bar valve! And slowly apply pressure on the first fill, all walls and seals have to settle under pressure and it’s better to get a oring pop out at 50 bar than at 250 bar
