2 NEW .22 CALIBER SLUGS

Jump to latest Follow Reply
jwrabbit123

jwrabbit123

Member
Feb 14, 2018
1,979
369
Ct, United States
Hi I had been looking threw mold sites and came across 2 new slugs for .22 caliber one is NOE 25 gr hollow point , it comes with 4 sets of pins , so far I casted with smallest and longest pins , they weighed 22 .5 gr and the other was 24 gr , so the other 2 must be in between , I would think this style in like 36 gr would be a super slug solid , maybe we should get a droup buy for NOE if anyone is interested ,



here is NOE 22.5 and 24 gr in .217





1582165444_14905874835e4dedc45de8d7.88819806_no322gr.JPG
1582165444_11696946585e4dedc4f3dc71.31532050_noe23gr.JPG


then I made some of the new mp 35 grain slug , I like the looks of the 35 gr , out of 20 molds I got in 2019 MP by far was my best molds for 22 calibers.so I bet these will be very good Ill post my groups of both here

Here is the new MP slugs which came in at 34.8 gr they are .217 as well .

1582165683_4680048205e4deeb39f20f8.50600665_mp35gr.JPG
1582165684_11940171475e4deeb4b701b5.75529384_newmp 22 slup 35 gr.JPG


LOU




 
Hey glem these are first ones I did not sort but looking at the noe , the mold and lead looks a bit too cold , they dont look filled in good at tip , I will make more over weekend with lead 25 degrees hotter , This is a brass mold for the noe and the mp mold is alum ,

well I just shot 3 shots off my deck across river ,200m and the mp slugs shot straight as an arrow in my r5m , I need to size them to ,216 , at 217 way too hard to close the bolt . I think the 35 gr will be amazing , who knows may be better then my other mp mold lol , the MP mold comes with a sizer as well
 
Upvote 0
no I sized both the slugs to 217 the noe was .218 , This MP mold came with a sizer the sizer is not labeled but after casting I can push threw thier sizer by hand my guess it is .220 , I believe I took.002 to get them to 217, and at .217 they still loading too hard I did order a puch threw sizer of .216 , If not I will have to make a longer transfer port or cut breech of my barrels , I do not want to shorten my bolt as I use many slugs ,

I am testing them in taipan and r5m now , the lighter ones Ill test in cricket and lower powered guns as they much lighter
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu