Zulus riser.

Jump to latest Follow Reply
MACTEN

MACTEN

Member
Nov 18, 2020
1,413
819
IA
Either I have a long neck, tall head or the stock scope mount for the Zulus is a bit on the short side. For a bullpup anyway. I tried it on several airguns and found it to be a bit short on all so I decided to look for a riser.
I didn't want a full length or long riser because I want to mount it on all the air rifles at some point and film groups for myself so I measured and counted rail slots and the closest one I could find that wouldn't look funky is linked below if anyone has the same issue.
If the mount height is good for you that's a plus for sure.

Amazon Cheap Riser

IMG_2750.JPG


IMG_2753 - Copy.JPG


IMG_2752.JPG
 
  • Like
Reactions: Airgun Al
MartinT said:
They must all be Taipans then…;)
The good news is you can get by with only one riser for all of them! And since it has these thumbscrews it’s much easier to change between guns than the standard mount which needs a hexdriver!
Click to expand...
I took a close look and they do differ a little bit. But you're right about being able to just put it on other airguns because of the thumbscrews (which I normally hate) I still have to address the reason I need one at all so I asked my wife if it was me or the guns. I guess she already knew 🦒
 
  • Haha
Reactions: MartinT
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu