I checked the crown today, was even but rough. Took a center lap to the bore to break some burrs. Hope to test tomorrow if the weather holds. And the wind isn’t above 40 mph.
Upvote 0
Zbroia Kozak POI (Shroud Fix, my take)
- Thread starter MACTEN
- Start date
Here’s another tip and I did it tonight. My gun likes 15.89’s. But when I switch to H&N Baracuda Hunters I have to back off a tiny bit of shroud tension. Before you give up on a pellet, play with the tension. The Baracudas will only shoot consistent if I screw the shroud on until it stops, then snug it just a tiny bit.
Upvote 0