Young Heng help

[Jacko]

Hello everyone, I have a Yong Heng compressor and it has been running great but I hear that there will come a time when I will need to rebuild the compressor.

I would like to pre-order the most common parts but just not sure what to get.

Any input is greatly appreciated.

Thank you jacko

 

[Sell682]

The orings it came with should help with a rebuild.

another piece would be the check valves 

 

[biohazardman]

I have two of the Yong Heng compressors one is two years old and doing fine and one is four months old and I had to replace the second stage piston, gaskets and a couple of dowty seals. The parts are linked below as is a tutorial to replacing the head o-rings and reed valves. The first stage piston often gets cracked or caves in when the second stage piston has problems or from prolonged stress. So I purchased the whole set although all I have used thus far is the 2nd stage piston as I caught it early enough.



O-ring and Dowty seal set

https://www.aliexpress.com/item/32853041828.html?spm=a2g0o.detail.100009.3.198b5caeDRf2LC&gps-id=pcDetailLeftTopSell&scm=1007.13482.95643.0&scm_id=1007.13482.95643.0&scm-url=1007.13482.95643.0&pvid=112ecf97-98dc-4018-acc1-15e2c91056bd&_t=gps-idcDetailLeftTopSell,scm-url:1007.13482.95643.0,pvid:112ecf97-98dc-4018-acc1-15e2c91056bd,tpp_buckets:668%230%23131923%2358_668%23808%235965%23484_668%23888%233325%2318_668%232846%238111%23447_668%232717%237566%23846_



Cylinder Gasket set

https://www.aliexpress.com/item/33029911299.html?spm=a2g0o.detail.1000060.3.35167a93q46lPL&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=9f8252f8-0b9a-4575-966c-16fbe31b7324&_t=gps-idcDetailBottomMoreThisSeller,scm-url:1007.13339.146401.0,pvid:9f8252f8-0b9a-4575-966c-16fbe31b7324,tpp_buckets:668%230%23131923%230_668%23808%234093%23867_668%23888%233325%231_668%232846%238114%23720_668%232717%237564%23676_668%233164%239976%23783



Second stage piston

https://www.aliexpress.com/item/32863290524.html?spm=a2g0o.detail.1000060.1.419c101cwm3qyn&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=3afe625b-9ab8-4b49-8531-e6f88421f809&_t=gps-idcDetailBottomMoreThisSeller,scm-url:1007.13339.146401.0,pvid:3afe625b-9ab8-4b49-8531-e6f88421f809,tpp_buckets:668%230%23131923%230_668%23808%234093%23867_668%23888%233325%231_668%232846%238114%23720_668%232717%237564%23676_668%233164%239976%23783



Piston set

https://www.aliexpress.com/item/32956081459.html?spm=a2g0o.detail.1000014.7.4b6b793dzJtxYm&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.14976.165517.0&scm_id=1007.14976.165517.0&scm-url=1007.14976.165517.0&pvid=76c653bc-155c-408c-98d2-704c8a84d790&_t=gps-idcDetailBottomMoreOtherSeller,scm-url:1007.14976.165517.0,pvid:76c653bc-155c-408c-98d2-704c8a84d790,tpp_buckets:668%230%23131923%230_668%23808%234093%23867_668%23888%233325%231_4976%230%23165517%237_4976%232711%237538%23394_4976%233104%239653%2310_4976%233141%239887%234_668%232846%238114%23720_668%232717%237564%23676_668%233164%239976%23783



Head o-rings and Reed valve install video



https://www.youtube.com/watch?time_continue=6&v=24sGXYkd4NY&feature=emb_logo

 

[SilentSquirrel]

I have two of the Yong Heng compressors one is two years old and doing fine and one is four months old and I had to replace the second stage piston, gaskets and a couple of dowty seals. The parts are linked below as is a tutorial to replacing the head o-rings and reed valves. The first stage piston often gets cracked or caves in when the second stage piston has problems or from prolonged stress. So I purchased the whole set although all I have used thus far is the 2nd stage piston as I caught it early enough.



O-ring and Dowty seal set

https://www.aliexpress.com/item/32853041828.html?spm=a2g0o.detail.100009.3.198b5caeDRf2LC&gps-id=pcDetailLeftTopSell&scm=1007.13482.95643.0&scm_id=1007.13482.95643.0&scm-url=1007.13482.95643.0&pvid=112ecf97-98dc-4018-acc1-15e2c91056bd&_t=gps-idcDetailLeftTopSell,scm-url:1007.13482.95643.0,pvid:112ecf97-98dc-4018-acc1-15e2c91056bd,tpp_buckets:668%230%23131923%2358_668%23808%235965%23484_668%23888%233325%2318_668%232846%238111%23447_668%232717%237566%23846_



Cylinder Gasket set

https://www.aliexpress.com/item/33029911299.html?spm=a2g0o.detail.1000060.3.35167a93q46lPL&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=9f8252f8-0b9a-4575-966c-16fbe31b7324&_t=gps-idcDetailBottomMoreThisSeller,scm-url:1007.13339.146401.0,pvid:9f8252f8-0b9a-4575-966c-16fbe31b7324,tpp_buckets:668%230%23131923%230_668%23808%234093%23867_668%23888%233325%231_668%232846%238114%23720_668%232717%237564%23676_668%233164%239976%23783



Second stage piston

https://www.aliexpress.com/item/32863290524.html?spm=a2g0o.detail.1000060.1.419c101cwm3qyn&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=3afe625b-9ab8-4b49-8531-e6f88421f809&_t=gps-idcDetailBottomMoreThisSeller,scm-url:1007.13339.146401.0,pvid:3afe625b-9ab8-4b49-8531-e6f88421f809,tpp_buckets:668%230%23131923%230_668%23808%234093%23867_668%23888%233325%231_668%232846%238114%23720_668%232717%237564%23676_668%233164%239976%23783



Piston set

https://www.aliexpress.com/item/32956081459.html?spm=a2g0o.detail.1000014.7.4b6b793dzJtxYm&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.14976.165517.0&scm_id=1007.14976.165517.0&scm-url=1007.14976.165517.0&pvid=76c653bc-155c-408c-98d2-704c8a84d790&_t=gps-idcDetailBottomMoreOtherSeller,scm-url:1007.14976.165517.0,pvid:76c653bc-155c-408c-98d2-704c8a84d790,tpp_buckets:668%230%23131923%230_668%23808%234093%23867_668%23888%233325%231_4976%230%23165517%237_4976%232711%237538%23394_4976%233104%239653%2310_4976%233141%239887%234_668%232846%238114%23720_668%232717%237564%23676_668%233164%239976%23783



Head o-rings and Reed valve install video





https://www.youtube.com/watch?time_continue=6&v=24sGXYkd4NY&feature=emb_logo

Excellent info biohazardman

This is worthy of becoming a Stickey

Moderators please.....

 

[lennyk]

Good advice above, the common thing that wears or breaks is the high pressure piston/plastic rings

they are a pain to change and can be damaged when stretching them on. Much easier to just buy the whole piston complete.

Also gasket sets since they often tear during disassembly.

Many were skeptical of the YH initially but over the last few years they have worked well and parts are cheap.

Once you do not abuse them and run them with ice water for not longer than 20-30mins at a time you will get good service out of them.

 

[Jacko]

Many thanks to you guys! Great information!!

I will go ahead and order these parts and have them when and if needed regards

Jacko