You know you’re addicted to airguns when…

[Pale_Rider]

You have nightmares about them! The rest of my dream was vague but I clearly remember being handed my old Diana 48. I pull the trigger thinking a pellet was in there. Except there was NO PELLET! No joke I woke up with a feeling of disappointment that I had dry fired my springer.

 

[beerthief]

Had a dream that i received a used gun in the mail and the stock was broken in shipping , luckily it did not happen when i got the rifle later that day . I blame AGN for making me read all those UPS damages.

 

[RM100GUY]

Dry fire would be bad but barrel or underlever slipping out of my hand wakes me up in a cold sweat, both nightmare senieros.

 

[Hateful McNasty]

Nightmares are a realistic if you shoot like me , but its in my dreams i become a good shot.

 

[JDR]

Then there is the other side of a dream. Could be walking down the aisle and when you turn to your new bride and she lifts her veil, you are staring at FWB 300.

 

[muddydogz]

When you refer to your pocket change jar as "pellet funds".

 

[Hateful McNasty]

When you refer to your pocket change jar as "pellet funds".

Or you got more pellets in your pocket then change .

Or washed pellets is the day you clean out the bottom of the washing machine..

 

[Ca_Varminter]

Well when you buy an
Alkins W31 Compressor...15 years ago...
Before anyone really knew what a PCP was......

Then you setup a Man Cave with a Lathe and CNC Mill to Tune and Customize your Airguns!!!!!!!!

Final Nail......You start to Swage your own Pellets...

Custom Guns shooting Custom Slugs.......

 

[Pale_Rider]

Well when you buy an
Alkins W31 Compressor...15 years ago...
Before anyone really knew what a PCP was......

Then you setup a Man Cave with a Lathe and CNC Mill to Tune and Customize your Airguns!!!!!!!!

Final Nail......You start to Swage your own Pellets...

Custom Guns shooting Custom Slugs.......

Won’t be long until your family is giving you an intervention

 

[.20calguy]

When you say, "I can quit."!

 

[Ca_Varminter]

Won’t be long until your family is giving you an intervention

Too Scared!!!
They Claimed I have Corrupted all my Nephews and Cousins..
A couple of them became Engineers... to do what I do....
They all call me for advice on tuning their guns.......Also computer advice on the side...

 

[Northwoods22]

Had a dream I was shooting my HW98. While cocking it the barrel didn't slip out of my hand, it broke clean off like it was made of glass, linkage too. My favorite rifle, busted in half. I have no freaking idea what that weird dream was all about. The 98 is just fine.

 

[Gerry52]

When you move to a new place 3 yrs ago (with attached garage) but your car has never been parked in it because the airgun work station, compressor setup, airguns & 4 crates of airgun parts, accessories, pellets, targets, bipods, tripods, pneumatic fittings, boxes of o-rings, etc won't allow room for the car. "My name is Gerry and I'm an addict".

 

[Pale_Rider]

Too Scared!!!
They Claimed I have Corrupted all my Nephews and Cousins..
A couple of them became Engineers... to do what I do....
They all call me for advice on tuning their guns.......Also computer advice on the side...

That’s awesome man! Great about more engineers that are into airguns. The future of airguns is looking good!

 

[Mr303]

I’m not addicted! I can quit any time!
…first things first though, hand me another target

 

[maxtrouble]

The only reason I quit buying rifles is because I have ran out of room. There is no where else to store another rifle unless I get rid of something else.

However, six pistols take up the same room as one rifle so I am now on a pistol kick!

 

[scopecreep...]

My first shot the afternoon my brother helped me sight in and provided basic shooting position instruction for my Daisy 1894. This was the day after my eighth birthday, over half a century ago. Within a few short years Mrs. Beeman would cheerfully greet me by name upon hearing my voice when I called.

 

[Ezana4CE]

Well when you buy an
Alkins W31 Compressor...15 years ago...
Before anyone really knew what a PCP was......

Then you setup a Man Cave with a Lathe and CNC Mill to Tune and Customize your Airguns!!!!!!!!

Final Nail......You start to Swage your own Pellets...

Custom Guns shooting Custom Slugs.......

This is where it’s at though. Stuff dreams are made of.

 

[Ca_Varminter]

This is where it’s at though. Stuff dreams are made of.

So Very True!!
Some need help with making their Dreams come True!
That is why I Browse and Admin these forums!!
When I can help, I will... All I ask in Return...
Spread the Knowledge!!
Pass it on the newbies and even to the Next Generation of Airgunners!!

 

[KatoKevin454]

when you go to every room in your house and all there is is airgun stuff everywhere......