Yong Heng Upgrades?

 





the biggest thing to up grade a young heng compressor is to make sure you have a real yh to start with . There are, in my mind major differences in some that are proported to be the same.All are blue. Piston valveing and pipeing are the big differences. I was cheating when I started and bought cheaper to start with . Needless to say , I was sorry about 1 and a half years later. I have the real thing now and haven't had grief for 2 years now. I just run smaller tanks and the guns them selves...........Parts are like a lot of air gun parts, tough to find and harder to get.
 






the biggest thing to up grade a young heng compressor is to make sure you have a real yh to start with . There are, in my mind major differences in some that are proported to be the same.All are blue. Piston valveing and pipeing are the big differences. I was cheating when I started and bought cheaper to start with . Needless to say , I was sorry about 1 and a half years later. I have the real thing now and haven't had grief for 2 years now. I just run smaller tanks and the guns them selves...........Parts are like a lot of air gun parts, tough to find and harder to get.

Where to buy genuine? You guys didn't leave any links. Is this the new version on the compressor?

1580236998_15831766065e3080c63e3437.11542107_Screenshot_20200128-134148_Amazon Shopping.jpg

 
5 gal bucket with lid, distilled water, big block of blue ice. Drill holes in lid for the water lines. Place water pump on a riser that raises the pump to be near central in the bucket. Air filter cartridges ( AoA )for your big gold filter. Don't forget to start your water pump before turn on the compressor AND be careful not to touch the steel tubing when you switch it off.They will burn you. Keep an eye on the temp as it's running, it heats up fast. sry don't do links,don't even know how,I have ask my son how to one of these days.