Has anyone hardwired an hour meter to there Yong Heng compressor and if so do you like it? Does it work for you? Which one did you buy? Thank you
Yong heng compressor hour meter?
- Thread starter Dan B
- Start date
Although on a gxcs4i i went with an amazon and hardwired to motor leads i also wired in dual water temp sensors one on pump head one on water tank guages are mounted on a piece of formed kydex and inline filter mounted behind guages
Upvote 0
Tape-secured, no wiring needed, under $20 (eBay) vibration hour meter has served well on my YH. Here's User Manual printed on back of blister pack. WM 
Upvote 0
I believe I have the same one as "Worried Man" on my GX CS2 and if I add one to the YH I will add the same one. No wiring, works fine.
Upvote 0
+1 for the wireless digital stick on (vibration activated) hour meter. I have the one shown in the pictures attached to my Yong Heng and it seems to be working fine. I have the sensitivity set to Hi. I installed it in 2018 and it is still working (not that many hours on the Yong Heng though). I don't think anyone sells this actual brand anymore, but there are numerous variations of it available on ebay or amazon.
Upvote 0
The wired should be simple you just need to find motor wires and splice in i do not know how to young is wired but my gx had bullet connectors already. So all i did was make a 2inch splice with bullet connectors and leads for the hour meter that way i did not have to alter factory wires. I would assume.....the yong has connectors of sorts to wire the motor. Pop the cover and post a pic i can tell you how to wire its pretty simple. With being wired to motor you are only clocking time when motor is running. The water pumps and fans will prolly clock time as the hour meters can be sensitive
Upvote 0