Has anyone hardwired an hour meter to there Yong Heng compressor and if so do you like it? Does it work for you? Which one did you buy? Thank you
Yong heng compressor hour meter?
- Thread starter Dan B
- Start date
Although on a gxcs4i i went with an amazon and hardwired to motor leads i also wired in dual water temp sensors one on pump head one on water tank guages are mounted on a piece of formed kydex and inline filter mounted behind guages
Upvote 0
Tape-secured, no wiring needed, under $20 (eBay) vibration hour meter has served well on my YH. Here's User Manual printed on back of blister pack. WM 
Upvote 0
I believe I have the same one as "Worried Man" on my GX CS2 and if I add one to the YH I will add the same one. No wiring, works fine.
Upvote 0
+1 for the wireless digital stick on (vibration activated) hour meter. I have the one shown in the pictures attached to my Yong Heng and it seems to be working fine. I have the sensitivity set to Hi. I installed it in 2018 and it is still working (not that many hours on the Yong Heng though). I don't think anyone sells this actual brand anymore, but there are numerous variations of it available on ebay or amazon.
Upvote 0