It let go at about 2,500psi. The compressor is rated at 3,000psi. I have taken it to 3,000psi multiple times. Is this compressor compromised in any way? What should be checked? What should be adjusted? Thanks in advance.
Yong Heng compressor busts it's disk....
- Thread starter Peep
- Start date
Probly should check the o-ring on the check valve on the high pressure block. As often as not mine is bad when I blow a disc. Extras o-rings usually come in a zip lock bag with other parts with your compressor.
As far as I know the Yong Hengs are all rated to 4350psi your model may just limit the pressure to 3000psi with a pressure sensor.
As far as I know the Yong Hengs are all rated to 4350psi your model may just limit the pressure to 3000psi with a pressure sensor.
Upvote 0
i fill my tanks to 4500 every time, but i run it indoors in the ac with a fan on it and time it .. only run it 10 minutes then bleed it turn it off and let it cool for at least 20 ... the whole thing gets hot .. thats what most people miss .. including the manifold blocks where the orings and disk are ... no amount of giant water pumps, radiators, and ice does jaxk sht for those .. only that potato between your ears can help the situation lol ...
Upvote 0
