Where can I get replacement burst discs & those white nylon/plastic flow restrictor thingies that go into the end caps of moisture filters before putting in foster connectors? Anyone have any to sell, trade, etc?
YONG HENG Burst discs & White Nylon "pressure rings"
- Thread starter Gerry52
- Start date
I ordered all that stuff from China a couple months ago when my compressor started making periodic noises. It took a while for it to get here but Ali express keeps you up to date when your stuff arrives in country.
Upvote 0
You'd be surprised if you check ACE HARDWARE plumbing and faucet as well as the hardware sections...
Upvote 0
Vetmx, can you post a link? YO, I figure I can find the nylon pieces bust pressure rated burst discs?
Upvote 0
Here is my topic and the links that the guys provided were very helpful.
https://www.airgunnation.com/topic/mr-yongs-gettin-a-death-rattle/
https://www.airgunnation.com/topic/mr-yongs-gettin-a-death-rattle/
Upvote 0
Yup as the link in the post above state aliexpress is the best place to get parts for the Yong Heng but it takes two to ten weeks to get them.
https://www.aliexpress.com/w/wholesale-yongheng%20parts.html
https://www.aliexpress.com/w/wholesale-yongheng%20parts.html
Upvote 0
Those white disks in the end caps of your filter are air seals Gold filters use M10*1 threads which are parallel, not tapered like NPT threads. The parallel threads cannot seal without these delrin disks. The air hose and Foster fittings are screwed down tight against each end seal.
Upvote 0
I prefer dowty bonded seals where possible over delrin inserts
for example https://www.discounthydraulichose.com/9500-10MM.html
for example https://www.discounthydraulichose.com/9500-10MM.html
Upvote 0