Hello
I have an air leak on my Yon Heng compressor
It comes from around the threads on the brass valve body that the Pressure Relief Screw screws into
Looking into the orifice I've seen no seals or O rings
Should there be any in there?
Here is a picture of the part
It s the brass one
https://www.aliexpress.com/item/32846679999.html?spm=a2g0o.productlist.0.0.4bc71b5fHWPzWi&algo_pvid=7be64169-dfc9-4948-b3fb-f0ad62777c05&algo_expid=7be64169-dfc9-4948-b3fb-f0ad62777c05-0&btsid=8f9cbf0e-e4f8-41a4-bd2d-36fd1d418765&ws_ab_test=searchweb0_0,searchweb201602_9,searchweb201603_55
Ed
PS
I've tried grey teflon tape, as well as a compression washer around the valve body
I have an air leak on my Yon Heng compressor
It comes from around the threads on the brass valve body that the Pressure Relief Screw screws into
Looking into the orifice I've seen no seals or O rings
Should there be any in there?
Here is a picture of the part
It s the brass one
https://www.aliexpress.com/item/32846679999.html?spm=a2g0o.productlist.0.0.4bc71b5fHWPzWi&algo_pvid=7be64169-dfc9-4948-b3fb-f0ad62777c05&algo_expid=7be64169-dfc9-4948-b3fb-f0ad62777c05-0&btsid=8f9cbf0e-e4f8-41a4-bd2d-36fd1d418765&ws_ab_test=searchweb0_0,searchweb201602_9,searchweb201603_55
Ed
PS
I've tried grey teflon tape, as well as a compression washer around the valve body