- Apr 25, 2021
- 4,122
- 6,211
- 84
Yong Heng Model YH–QBO1, 4,500psi with a Custom Built all Aluminum roll around stand with a 5-gallon aluminum water cooling tank. Asking $550.00 or best offer.
PLUS the following accessories;
*) Tuxing Gold Air Filter
*) Secondary Air Filter located ahead of the Main Tuxing air filter
*) Quick simple removal of both filter cartridges for cleaning or replacement
*) 4,500psi hose with Foster Quick Disconnect fittings on both ends for the “Out Air” end to connect to most PCP air guns and air tanks
*) A second 4,500psi hose with a Foster Quick Disconnect fitting that connects both filters to the compressor
*) Solid brass fittings for the water exchange system and bulkheads
*) Brass ball valve for draining water tank
*) Submersible water pump
*) Pull out parts drawer
*) LED light to view compressor and pressure gage
*) Extra filter cartridges
*) Extra compressor oil
*) Extra water treatment chemicals
*) Extra burst plates
*) Extra silicon hose.
I drained and replaced the factory oil after one (1) hour of run time. After an additional four (4) more hours of run time I drained and replaced the oil. It now has a total run time of approximately 5-1/2 to 6 hours.
To be picked up in Etoile, Texas 75944
I have this listed on my website so it can be purchased with a credit card; www.uncletomsplace.net
Please contact me if you have any questions.
Lot more photos on my website.
PLUS the following accessories;
*) Tuxing Gold Air Filter
*) Secondary Air Filter located ahead of the Main Tuxing air filter
*) Quick simple removal of both filter cartridges for cleaning or replacement
*) 4,500psi hose with Foster Quick Disconnect fittings on both ends for the “Out Air” end to connect to most PCP air guns and air tanks
*) A second 4,500psi hose with a Foster Quick Disconnect fitting that connects both filters to the compressor
*) Solid brass fittings for the water exchange system and bulkheads
*) Brass ball valve for draining water tank
*) Submersible water pump
*) Pull out parts drawer
*) LED light to view compressor and pressure gage
*) Extra filter cartridges
*) Extra compressor oil
*) Extra water treatment chemicals
*) Extra burst plates
*) Extra silicon hose.
I drained and replaced the factory oil after one (1) hour of run time. After an additional four (4) more hours of run time I drained and replaced the oil. It now has a total run time of approximately 5-1/2 to 6 hours.
To be picked up in Etoile, Texas 75944
I have this listed on my website so it can be purchased with a credit card; www.uncletomsplace.net
Please contact me if you have any questions.
Lot more photos on my website.
Last edited:
