• The buying, selling, trading, or gifting of a standalone airgun moderator is no longer supported in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

[WTS] RAW HM1000x tuned and modded. Price reduced

Status
Not open for further replies.

Liam

Member
Feb 13, 2019
21
1
MI, United States
Feedback: 0 / 0 / 0
I bought this .25 Rapid Air Weapons HM1000x in 2016 and have only managed to shoot about 1000 rounds through it, which is why I have made the sad decision to sell it, and maybe get something smaller and semi-automatic. It is extensively modified and tuned by Alan Zasadny, from whom I bought it new. (Allan is an excellent and rather well known airgunsmith)
Mods, tunes and add-ons are:
– Barrel shortened and recrowned (I can't remember to exactly what length. It doesn't compromise accuacy though)
– Custom full length barrel shroud/moderator made by Allen (this thing barely whispers)

– Carbon fiber 480cc air bottle gives 60 good shots at current settings. Comes with fill adapter.

– Bushnell Elite 4-16×40 scope + rings zeroed @35yd
– The barrel has been mechanically aligned with the scope
– Completely accurized and tuned by Alan Zasadny
– trigger set to 5.03 oz. All components blueprinted & polished

The original stock is immaculate because I only used it a few times before I built my own. The same cannot be said of the action though; it does have some scratches here and there as shown in the pictures.

Overall, it works really well and is incredibly accurate. I was never much into target shooting so I don't have nice groups to show off, but I can tell you that shooting .22 casings at 50yds gets rather boring, and you find yourself doing things like trying to shoot the primer of a 20ga (It works :) ) . According to Allan, it shoots 25.4grain JSB Kings at 890fps, that is, 44.7 fpe. Power is never an issue! 

Asking $2300 2100 + shipping but open to offers/trades (semi-automatic or unusual systems like the FX Indy)

If you're interested, please email me at ljmnoonan@gmail dot com or text to (616)201-9093

(I'll be shipping it in the case shown below in a box and some extra padding and maybe reinforced with plywood)



1584501665_10858069205e7193a109bd68.41533674.jpg
1584501666_10269572235e7193a2b7f613.29242398.jpg
1584501667_20919589485e7193a389c930.16361308.jpg
1584501669_1681000445e7193a5373b92.02386735.jpg
1584501763_5649979075e71940383d435.31247755.jpg
1584501764_12886612415e7194049b7b45.86945655.jpg
1584501765_10810245335e719405d86f73.12267421.jpg
1584501766_11200100145e719406b3c222.23189576.jpg
1584501767_10833246755e7194078caec4.74467885.jpg
1584501768_3297009805e7194089fcae5.71878238.jpg
1584501769_17897986465e719409644c41.82191697.jpg

 
Status
Not open for further replies.