• The buying, selling, trading, or gifting of a standalone airgun moderator is no longer supported in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

[WTS] Plate steel

DLFant

Member
May 16, 2015
98
5
TX, United States
Feedback: 4 / 0 / 0
4A79C8D7-4C22-48C1-9815-27634B2FB348.1653765000.jpeg
9F80F47F-20D4-48AC-AB9F-510A97F8B421.1653765001.jpeg
8C499FF5-4B90-4A4F-966A-545F36E0FF58.1653765003.jpeg
3E8626EB-5EC3-49AC-9013-DFEEB3A021DC.1653765005.jpeg
99084225-5F4C-407D-A743-AA987C5F299F.1653765006.jpeg
8EE6A9E4-C318-4EF1-8F96-CEA235CE9E25.1653765046.jpeg
I have a large number of Heavy A36 steel plates from 5/8” to 1” thick. These are new drops left from the manufacturing process. 
Sizes are as follows:
8”x 8”x 5/8” squares with corner holes
6 3/4”x 6 3/4” x 1” squares 
7”x 1” circles
All @ only $15 each
4 1/2 “ x 1” circles
4” x 1” circles
@ only $10 each
Also some 3/8”x 8”x8” Ar500 armor plate @ $40 each. 
As seen in pictures most have a light film of rust and slag from the laser start hole. They are easily cleaned as shown in before and after picture of the two square pieces together. If you like we can de-burr & de-slag for $5 each. 
Six of the large ones will fit in a medium flat rate box & ships for $16.
They weigh approximately 11 pounds each for the larger ones.