With my backyard range down to 25yds and now in the midst of a move (6 month vacation home that does not allow air rifle shooting) I have decided to sell my PCP collection and support gear. Would very much like to deal face to face to avoid the hassles of shipping. I live in zipcode 21009 and (for $1000 purchaser) will travel 100 miles to meet a buyer. I want to sell the rifles before selling support gear, but will sell as a package in a face to face. All prices listed are face to face. Will make a really nice deal for someone who would want everything.
All of the pics I have are with scopes. The prices listed do NOT include the scopes. Can include at a higher price, but I had just planned to sell them later to PB friends.
All of the shot strings were done with unsorted pellets right from the tin.
Here is what I have
1) Air Force Texan .457 (with almost 450 slugs (200-495g) - $200 plus) Have only fired the gun 2 times to verify function after purchase. Reading of how the stock springs fatigue I did purchase, and install the AAO spring. Have not had time to do anything else with it. Several boxes of slugs in various weights. The gun does have some dings in the rails as the prior owner had all kinds of accessories on it. I filled to 3K and it has not changed the entire time I have had it. $750 - SOLD
2) Sumatra 2500 Carbine in .25 that I have “tuned”. Here is what has been done:
LDC from Roy K – does a fantastic job of quieting it down to backyard friendly. It is all aluminum. I did repaint it as the original finish was a kinda “satin” and I wanted it glossy to match the barrel of gun.
Fill port replaced with foster fitting
Poppet replaced with Delrin one from Saddle Mountain
Smoothing and polishing of trigger
Spring change.
Right now I have it tuned for 3000psi fill. It shoots the 33.95 JSB's from 860fps up to 890fps back to 860fps over 12 shots (2 mags). (Avg 58fpe)
I shot a string with 43.6 EJ pellets and got the below starting at 3K. If I had started at 2950 I think the first shot would also be w/i the 2% spread
777,795,789,789,795,800,794,800,803,799,799,791
Only issue with the gun is a small crack in the forearm wood underneath. Purely cosmetic. It is really hard to see, but with the flash I got it to show good in the picture. It is actually not this noticeable in person.
Gun is just about 44” with the LDC and under 36” without it. $500
3) BSA Ultra SE in .25 – Gun has a custom CF shroud and Blast Tamer I put one of the Huma screw on regs and am getting 20 shots at almost 26FPE on a full (232bar) fill. Without the reg I was getting 16 shots (w/i 4%) peaking at 30FPE. The gun comes with 2 (8shot) mags
Here is the latest shot string with 25.4 JSB and full fill
Mag 1 - 674, 680, 672, 674, 678, 678, 678, 675
Mag 2 - 678, 680, 679, 678, 679, 682, 680, 682
Mag 3 - 679, 678, 676, 677, 668, 658
20 shots ES-8 (1.2%) – 25.9 FPE
$700
4) BSA Tech Star - .22 with Huma in tube regulator and a Blast Tamer. Loves the JSB 18.1's
Here is the latest shot string from a full (232 bar) fill
856, 866, 863, 861, 857, 862, 856, 858, 857, 864
858, 860, 858, 860, 854, 861, 856, 864, 856, 860
862, 867, 860, 862, 857, 862, 860, 856, 862, 854
865, 865, 862, 850, 856, 854, 851, 843
37 shots ES-17 (2%) - 29.7 FPE
$400 – also have a Neil Clague CF moderator. I will include for an additional $75.
5) Crosman Prod with Lane regulator, MM Moderator, 4 mags, single shot tray, BiPod, Hand grip and ATI cheek riser. Gun has been tuned (and is very accurate with 14.66 H&N 5.55) It is getting 35 shots at 15.4FPE (w/i2%)
Here is the latest shot string filled to 3K psi
Mag 1 - 691, 690, 692, 689, 690, 685, 682, 681
Mag 2 - 689, 683, 687, 690, 682, 685, 690, 688
Mag 3 - 690, 695, 687, 686, 689, 692, 681, 685
Mag 4 - 685, 687, 690, 688, 682, 688, 692, 691
Mag 5 - 692, 693, 687, 680, 680, 664, 656, 648
$400 - SOLD
Below for sale AFTER guns are sold, or along with gun purchase. Do not want to deal with shipping the compressor at this time. Will sell a tank with a gun, but need to hold compressor till at least the Texan is sold.
Shoebox F8 compressor with HPA filter and LPA filter. I have extra belts and about 5 rebuild kits. I have had this for approx 2 years and it has worked great. I rebuilt it once just because of using it. When I rebuilt it it was not experiencing any issues. Not sure the shut off works (or is adjusted right). I usually keep an eye on it and manually shut it off at 4600psi.
60Min Drager (EU certified) tank. Manufactured 08/2010 – Last Hydro 02/2016 - TANK SOLD
Would like to sell this with the SB as some guys report having issues getting them filled commercially since they are EU certified and not DOT. Also comes with fill assembly, strap handle and protector.
Compressor, filters and tank - $800
Benjamin 90 CI buddy bottle with fill. Manufactured 01/2014 – still in hydro - $200 - SOLD
Ninja 68CI 4500 bottle with reg set at 2800. Includes tethering set up with ON/OFF and bleed valve that is super easy to use. Manufactured 03/2011. Tank is in excellent shape and I see no reason it won't pass hydro. It is currently out of hydro.
I set this up for use with the Texan, but works great for bench shooting all the other guns too- $160
Please send PM or email me at basscop2 (2) yahoo.com for pics or more information.
If I get time tomorrow I will uploads pics
Mod Edit: Use the approved acronyms. WTS added
All of the pics I have are with scopes. The prices listed do NOT include the scopes. Can include at a higher price, but I had just planned to sell them later to PB friends.
All of the shot strings were done with unsorted pellets right from the tin.
Here is what I have
1) Air Force Texan .457 (with almost 450 slugs (200-495g) - $200 plus) Have only fired the gun 2 times to verify function after purchase. Reading of how the stock springs fatigue I did purchase, and install the AAO spring. Have not had time to do anything else with it. Several boxes of slugs in various weights. The gun does have some dings in the rails as the prior owner had all kinds of accessories on it. I filled to 3K and it has not changed the entire time I have had it. $750 - SOLD
2) Sumatra 2500 Carbine in .25 that I have “tuned”. Here is what has been done:
LDC from Roy K – does a fantastic job of quieting it down to backyard friendly. It is all aluminum. I did repaint it as the original finish was a kinda “satin” and I wanted it glossy to match the barrel of gun.
Fill port replaced with foster fitting
Poppet replaced with Delrin one from Saddle Mountain
Smoothing and polishing of trigger
Spring change.
Right now I have it tuned for 3000psi fill. It shoots the 33.95 JSB's from 860fps up to 890fps back to 860fps over 12 shots (2 mags). (Avg 58fpe)
I shot a string with 43.6 EJ pellets and got the below starting at 3K. If I had started at 2950 I think the first shot would also be w/i the 2% spread
777,795,789,789,795,800,794,800,803,799,799,791
Only issue with the gun is a small crack in the forearm wood underneath. Purely cosmetic. It is really hard to see, but with the flash I got it to show good in the picture. It is actually not this noticeable in person.
Gun is just about 44” with the LDC and under 36” without it. $500
3) BSA Ultra SE in .25 – Gun has a custom CF shroud and Blast Tamer I put one of the Huma screw on regs and am getting 20 shots at almost 26FPE on a full (232bar) fill. Without the reg I was getting 16 shots (w/i 4%) peaking at 30FPE. The gun comes with 2 (8shot) mags
Here is the latest shot string with 25.4 JSB and full fill
Mag 1 - 674, 680, 672, 674, 678, 678, 678, 675
Mag 2 - 678, 680, 679, 678, 679, 682, 680, 682
Mag 3 - 679, 678, 676, 677, 668, 658
20 shots ES-8 (1.2%) – 25.9 FPE
$700
4) BSA Tech Star - .22 with Huma in tube regulator and a Blast Tamer. Loves the JSB 18.1's
Here is the latest shot string from a full (232 bar) fill
856, 866, 863, 861, 857, 862, 856, 858, 857, 864
858, 860, 858, 860, 854, 861, 856, 864, 856, 860
862, 867, 860, 862, 857, 862, 860, 856, 862, 854
865, 865, 862, 850, 856, 854, 851, 843
37 shots ES-17 (2%) - 29.7 FPE
$400 – also have a Neil Clague CF moderator. I will include for an additional $75.
5) Crosman Prod with Lane regulator, MM Moderator, 4 mags, single shot tray, BiPod, Hand grip and ATI cheek riser. Gun has been tuned (and is very accurate with 14.66 H&N 5.55) It is getting 35 shots at 15.4FPE (w/i2%)
Here is the latest shot string filled to 3K psi
Mag 1 - 691, 690, 692, 689, 690, 685, 682, 681
Mag 2 - 689, 683, 687, 690, 682, 685, 690, 688
Mag 3 - 690, 695, 687, 686, 689, 692, 681, 685
Mag 4 - 685, 687, 690, 688, 682, 688, 692, 691
Mag 5 - 692, 693, 687, 680, 680, 664, 656, 648
$400 - SOLD
Below for sale AFTER guns are sold, or along with gun purchase. Do not want to deal with shipping the compressor at this time. Will sell a tank with a gun, but need to hold compressor till at least the Texan is sold.
Shoebox F8 compressor with HPA filter and LPA filter. I have extra belts and about 5 rebuild kits. I have had this for approx 2 years and it has worked great. I rebuilt it once just because of using it. When I rebuilt it it was not experiencing any issues. Not sure the shut off works (or is adjusted right). I usually keep an eye on it and manually shut it off at 4600psi.
60Min Drager (EU certified) tank. Manufactured 08/2010 – Last Hydro 02/2016 - TANK SOLD
Would like to sell this with the SB as some guys report having issues getting them filled commercially since they are EU certified and not DOT. Also comes with fill assembly, strap handle and protector.
Compressor, filters and tank - $800
Benjamin 90 CI buddy bottle with fill. Manufactured 01/2014 – still in hydro - $200 - SOLD
Ninja 68CI 4500 bottle with reg set at 2800. Includes tethering set up with ON/OFF and bleed valve that is super easy to use. Manufactured 03/2011. Tank is in excellent shape and I see no reason it won't pass hydro. It is currently out of hydro.
I set this up for use with the Texan, but works great for bench shooting all the other guns too- $160
Please send PM or email me at basscop2 (2) yahoo.com for pics or more information.
If I get time tomorrow I will uploads pics
Mod Edit: Use the approved acronyms. WTS added
