Mod edit: changed NLA to WTS
Edit 9/17: Price Drops
Thinning the herd for the fall with two very nice airguns for sale. Both guns shoot very accurately and consistently.
Note:
1) Benjamin Marauder Woods Walker P-Rod. This gun was purchased new by me and I have had it for about 1.5 years. In that time the following has been customized/upgraded on the gun.
Currently setup for the JSB .22 15.89gr pellet @ 740 fps. With this setup and a ~3200psi fill I'm getting a solid 9 shots @ ~19fpe on reg. Some more tweaking with the regulator and HS, or for different pellets, could yield results with more shots. I have also had the reg set very low and with the stock hammer spring (included) and setup for JSB .22 14.34gr I was getting 3 mags at ~600-650fps.
I also want to note that I installed the Huma Reg following the instructions to keep the gauge to show regulated pressure and be an indicator for when it goes off reg. This installation method does suggest that it could result in small leaks. There is a minimal leak which lets air escape over a few weeks, but it's perfectly fine during a shooting session. Removing the gauge section resolves this.
Scope not included.
Price: $850
2) EdGun R5 Matador .30 Standard. Serial # 082. I purchased this gun used so I am the 2nd or possibly 3rd owner. Excellent condition and very powerful, accurate and quiet. Huma Regulator installed and set to 130 bar. Hammer spring set to get 900fps with 44.75gr JSB pellets. (See chrono results below from setting the HS this morning.) I purchased and installed the blue laminate stock. I do have the original wood stock and can install that if the buyer prefers.
Price: $1450
Edit 9/17: Price Drops
Thinning the herd for the fall with two very nice airguns for sale. Both guns shoot very accurately and consistently.
Note:
- Payment via PayPal only. Purchase option preferred, and I don't ask extra for fees.
- Shipping to US included in price.
- Happy to discuss any questions.
- Please - no trade offers for these sales.
1) Benjamin Marauder Woods Walker P-Rod. This gun was purchased new by me and I have had it for about 1.5 years. In that time the following has been customized/upgraded on the gun.
- Woods Walker camo parts replaced with flat black Prod parts ordered directly from Benjamin. (original camo part not included)
- Lothar Walther .22 choked barrel. Purchased from JSAR and had them machine it to fit. LW currently installed, original barrel included.
- 6 x .22 Magazines included
- Huma regulator set to 130 bar.
- Hill Matched Parts Kit (Valve, Hammer, Hammer Spring, Transfer Port w/ 0.040" ID) installed (original valve and parts included)
- DonnyFL 1/2"x20 UNF Adapter.
- Steve Corcoran Royale Jacaranda Laminate Stock. For full disclosure there is a small mark on the stock at one of the grip screws where the screw head sheared off and I had a heck of a time getting it out. The screw is installed fine now with a replacement and the mark is pictured below.
- Sling Swivel Stud / Pic Rail Adapter installed.
Currently setup for the JSB .22 15.89gr pellet @ 740 fps. With this setup and a ~3200psi fill I'm getting a solid 9 shots @ ~19fpe on reg. Some more tweaking with the regulator and HS, or for different pellets, could yield results with more shots. I have also had the reg set very low and with the stock hammer spring (included) and setup for JSB .22 14.34gr I was getting 3 mags at ~600-650fps.
I also want to note that I installed the Huma Reg following the instructions to keep the gauge to show regulated pressure and be an indicator for when it goes off reg. This installation method does suggest that it could result in small leaks. There is a minimal leak which lets air escape over a few weeks, but it's perfectly fine during a shooting session. Removing the gauge section resolves this.
Scope not included.
Price: $850
2) EdGun R5 Matador .30 Standard. Serial # 082. I purchased this gun used so I am the 2nd or possibly 3rd owner. Excellent condition and very powerful, accurate and quiet. Huma Regulator installed and set to 130 bar. Hammer spring set to get 900fps with 44.75gr JSB pellets. (See chrono results below from setting the HS this morning.) I purchased and installed the blue laminate stock. I do have the original wood stock and can install that if the buyer prefers.
Price: $1450